themetallikid Posted August 14, 2017 Share Posted August 14, 2017 Is there a setting that allows me to see the LED's setup for a preset without the snapshot being selected? for example, I have LEDs setup as Snapshot 1 - White LED - Rhythm Snapshot 2 - Blue LED - chorus Snapshot 3 - None - not used Snapshot 4 - Green LED - lead When I'm playing and singing, it would be helpful to be able to look down and see the colors and know which snapshot I want to step on. Right now the only LED that is lit is the one that is active. This would be more useful if (like my Liquid Foot Controller had) where the LEDs had a dim and bright setting. So active snapshots would be bright, and dormant snapshots would be dimmed. This visually may be easier if you color code your sounds in a preset like I do. Otherwise I have to look at the screen, then find the correct button, which normally isn't a problem, but while trying to sing/play it can be hard at times to look at that much information at one time. Quote Link to comment Share on other sites More sharing options...
phil_m Posted August 14, 2017 Share Posted August 14, 2017 Global Settings>Displays, Knob 1 "LED Ring Brightness" will do what you want to do in Stomp Mode, but I'm not entirely sure if it effects snapshots or not. This thread seems to indicate it did, although there was a bug with the way it worked. I don't know if it was addressed or not. Quote Link to comment Share on other sites More sharing options...
saks Posted August 14, 2017 Share Posted August 14, 2017 I just checked on my helix and the dim appears to be working properly for me on the top and bottom rows. Quote Link to comment Share on other sites More sharing options...
themetallikid Posted August 14, 2017 Author Share Posted August 14, 2017 Is that the setting that just sets the LED to bright or dim? I'm aware of that. What I'm referring to is the ability to see all of my snapshots LED's on, all the time, with the active one being bright, the non-actives dimmed. So I use the 4 preset/4 snapshot mode with presets on the top. My bottom row, there is only one LED on, and it is the current snapshot. I cannot see what each other button 2,3 or 4 are color coded unless I step on that button to activate that snapshot. It'd be nice to be able to see them all, but the active one is set to Bright, while the others are set to dim. Quote Link to comment Share on other sites More sharing options...
duncann Posted August 14, 2017 Share Posted August 14, 2017 The global setting mentioned above by phil_m does indeed affect snapshots. And if there ever was a problem with the top row not abiding by the dim/off global setting for snapshots, it appears to work correctly with version 2.21.0. Quote Link to comment Share on other sites More sharing options...
saks Posted August 14, 2017 Share Posted August 14, 2017 The global setting mentioned above by phil_m does indeed affect snapshots. And if there ever was a problem with the top row not abiding by the dim/off global setting for snapshots, it appears to work correctly with version 2.21.0. this is what I meant. My response wasn't very clear :/ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.