themetallikid Posted November 14, 2017 Share Posted November 14, 2017 Hey, I'm at work when the thought came to me so I don't have my unit in front to know if I can do this. Usually work in snapshot mode, and am beginning to setup a switch in Stomp Mode that will be a momentary lead boost (while depressed, off when let go) for those songs that need that. But its opening up an option I used to use in my Fractal often that I didn't think about. I used to be able to attach 2 IA switches on my Ground Control Pro that would increase/decrease the patch volume when pushed and automatically save that setting. So you could adjust on the fly if something was louder/softer than what you assumed it would be. I generally try to level my patches as best I can, but there always seems to be a few that slip through and this was a great way to catch it on the fly. Anyone know if this feature would be there for me in Stomp mode? I know I can generally just reach down and adjust the Ch. Volume of the amp block (which is where I save my presets to show when I recall them), however, that is tough when I have 3 or 4 snapshots where the Ch. Volume varies, would need an overall preset volume. I can then go back through patches that have had that overall volume adjusted and fine adjust the Ch. Volumes across the Snapshots to bring them all down. Quote Link to comment Share on other sites More sharing options...
brue58ski Posted November 14, 2017 Share Posted November 14, 2017 I don't believe you can do what you describe. You can assign the stomps to actually toggle between two different levels, but you can't have one bring the volume up and another bring the volume down in increments. It sounds like that's what you would want and you can't as far as I know anyway. Of course you could assign the level to an expression pedal. Don't take this as gospel though. Quote Link to comment Share on other sites More sharing options...
phil_m Posted November 14, 2017 Share Posted November 14, 2017 Remember, there's always Pedal Edit mode which allows to adjust any parameter in any of the blocks with your feet. So you could actually go to the amp block and adjust the channel volume, and you can actually re-save the patch from Pedal Edit mode, too. Quote Link to comment Share on other sites More sharing options...
themetallikid Posted November 14, 2017 Author Share Posted November 14, 2017 Yeah, I don't really do much for volume use with expression pedals, unless the song requires it. But it was a nice way of leveling patches in a live environment and then going back to adjust them. Really made it streamlined. try presets live, make adjustments on songs adjust amp ch volumes to match adjustment to preset volume variance try presets live again, rinse and repeat It worked well, if I adjusted the preset volume +/- 3db, I would adjust the amp ch. volume by that amount and reset the preset volume back to 0 to help with the next round. Really helped hear patches in a full band and be able to adjust live. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.