Jump to content
Elbutcho1

No Sound From My Ux1

Recommended Posts

Can't figure out what the heck is going on. I was using my UX1 a few nights ago to practice and now no sound.

When I open gear box and tap the 1/4" jack or even hit the opoen strings on my guitar I can see the needle jump on the record send on the meter so I have signal but no sound. I was watching You Tube a few mins ago without the USB plugged into the PC and now with it plug in no sound (I guess it over ride the PC speackers,

I'm using Alesis powered monitors for the UX, must be something simple but I can't figure it out. The OS is vista and looking at the control panel / sound it says (speakers 2 - line 6 UX1, working)

 

Any help would be awesome

 

I'm bewildered

Share this post


Link to post
Share on other sites

Make sure you are using the latest versions of Line 6 software and the latest drivers.  If you are installing from the disk you'll have problems.  Get new versions from here http://line6.com/software.  Start with Line 6 Monkey 1.65.  You can update the rest of your software from there.

 

Also, you might want to use POD Farm 1.12 instead of Gearbox.  1.12 is a free upgrade and is much better.  Do not install Pod Farm 2.55 unless you are prepared to PAY for the upgrade.

Share this post


Link to post
Share on other sites

no its in your windows control panel (or mac syspref)

 

Is that control panel in Gearbox?

Share this post


Link to post
Share on other sites

What am I looking for?

It say under input and recording

record sends

1-2 instrument unprocessed

3-4 instrument unprocessed

 

Should I be looking for something else?

 

It does say (Driver version 4.0.2.3) and ESN Error!

Share this post


Link to post
Share on other sites

Make sure you are using the latest versions of Line 6 software and the latest drivers.  If you are installing from the disk you'll have problems.  Get new versions from here http://line6.com/software.  Start with Line 6 Monkey 1.65.  You can update the rest of your software from there.

 

Also, you might want to use POD Farm 1.12 instead of Gearbox.  1.12 is a free upgrade and is much better.  Do not install Pod Farm 2.55 unless you are prepared to PAY for the upgrade.

Ok..........working kinda sorta....got the monkey 1.65 and POD Farm 1.12.........now the sound cuts out when I watching YouTube and iwhen I open control panel snd open line 6 it comes back on..........nutty??? 

Share this post


Link to post
Share on other sites

Hi

 

Sorry for my terrible english - translator :)

My problem with UX1 is similar. Well UX is installed in OS Win XP, Win Vista, Win 7, Win 8 and the effect is exactly the same. The UX installed correctly. The green led and still no sound in headphones or through the analog output to the speakers .Four different systems and four different computers - no sound. Every time I check the OS sets the UX as the main card and each time there is no sound. Under Vista, 7 and 8 are shown next to the volume slider that responds to the music playing and still can not hear her. Music played in winamp, windows media player, and foobar2000 1.1.6.

I do not know what to do. I'm out of ideas. Maybe someone can help.

 

Thanks in advance for any advice and ideas. If I do not fix it then I give that interface to the service.

 

Regards

Share this post


Link to post
Share on other sites

I have the same problem. There is no sound through my ux1.Not only in pod farm. My computer is muted totaly, even if i can see that volume slider is responding to the music I'm playing.  I have updated everything with my line6 monkey but still cant hear anything on my computer

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×