zguitar67 Posted September 22, 2018 Share Posted September 22, 2018 Wondering if there are any pedals that work with the HX, besides the Mission... What are you using? Quote Link to comment Share on other sites More sharing options...
codamedia Posted September 23, 2018 Share Posted September 23, 2018 M-Audio EX-P.... Cheap, cheap, cheap... yet functions fine and is relatively sturdy for the price tag. * Set the switch on the back to M-Audio * Set the MIN knob all the way down * (Optional) Open it up and solder a bare wire across the 1K resistor so it's out of play. This allows the pedal to work with blocks that require "auto on" such as a WAH. Quote Link to comment Share on other sites More sharing options...
datacommando Posted September 23, 2018 Share Posted September 23, 2018 20 hours ago, zguitar67 said: Wondering if there are any pedals that work with the HX, besides the Mission... What are you using? Answer 1: Yes Answer 2: See reply from “codamedia” above. You could buy a dozen M-Audio EX-P units for the price of a Mission. I have 2 permanently hooked up to my Helix Floor box, although I’m a studio rat, so they don’t go on the road. Good enough tho’. Quote Link to comment Share on other sites More sharing options...
Bear706 Posted September 23, 2018 Share Posted September 23, 2018 I've got the Helix Rack and floor controller. I'm using an Ernie Ball VP Jr. It's a Passive pedal, around $99.00. (I had it left over from my traditional pedal board setup) Simply plug the Output from the pedal to EXP2... Works for volume and gain level great. It will control the Wah, but doesn't have a switch to turn the wah on and off... Quote Link to comment Share on other sites More sharing options...
zguitar67 Posted September 23, 2018 Author Share Posted September 23, 2018 13 hours ago, codamedia said: M-Audio EX-P.... Cheap, cheap, cheap... yet functions fine and is relatively sturdy for the price tag. * Set the switch on the back to M-Audio * Set the MIN knob all the way down * (Optional) Open it up and solder a bare wire across the 1K resistor so it's out of play. This allows the pedal to work with blocks that require "auto on" such as a WAH. Do you have a visual for that mod? 13 hours ago, codamedia said: Quote Link to comment Share on other sites More sharing options...
codamedia Posted September 24, 2018 Share Posted September 24, 2018 21 hours ago, zguitar67 said: Do you have a visual for that mod? I don't have my board with me today .... It's really quite easy... open it up and find the 1K resistor. It should be the only resistor in the box. There are two options... Remove it and replace it with a wire Just solder a wire to the two ends of the resistor (even though the resistor is still there, by putting a wire across it you have eliminated the resistance) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.