drschultz Posted November 12, 2013 Share Posted November 12, 2013 Hello all, quick question. HD500 L6 Linked to the DT25 1x12. My question is which amp controls take precedence, the HD500 or the DT25? Example: If the DT25 gain control is set at 12 o'clock but the gain for the amp on the HD500 is set for 10 o'clock which is the true gain setting? Thanks! Dan Quote Link to comment Share on other sites More sharing options...
TheRealZap Posted November 12, 2013 Share Posted November 12, 2013 it will recall the tone as saved.. after that communication is 2 way... whichever one you turn will work... it won't save unless you press save explicitly... Quote Link to comment Share on other sites More sharing options...
radatats Posted November 12, 2013 Share Posted November 12, 2013 as TheRealZap said, the POD always takes control when using L6 link. Once a patch is selected however, either the DT or the POD knobs will affect the signal. If you make changes using the knobs on the DT and then press save on the POD, those changes are still saved just as if you had done it on the POD. If you then change patch, any changes not saved are lost and the POD's new settings are applied. Quote Link to comment Share on other sites More sharing options...
drschultz Posted November 12, 2013 Author Share Posted November 12, 2013 Thanks to you both for the fast response. I am starting to get more into creating more patches for the HD500 + DT25 vs HD500 + PA. Thanks again, Dan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.