IcaroPaiva Posted December 6, 2013 Share Posted December 6, 2013 Hi,I cannot find a way to use my input channels on the UX2 to record without having to open te POD Farm and I really do not want to use the POD Farm because I already have my tone presets and it changes them.Can anyone give me some help please?Thank you! Quote Link to comment Share on other sites More sharing options...
BigChas52 Posted December 6, 2013 Share Posted December 6, 2013 Make sure that you are using the UX2 ASIO sends to record. You will not need to have POD Farm open, and you will record dry. That simple. Quote Link to comment Share on other sites More sharing options...
agb1954 Posted January 9, 2015 Share Posted January 9, 2015 I have the same problem. I have mixcraft and the only way to use the UX2 is via podfarm. I cannot find a way to access the UX2's mixer controls in order to switch between inputs on the UX2...contrary to the expert answer, it is NOT simple... Quote Link to comment Share on other sites More sharing options...
silverhead Posted January 9, 2015 Share Posted January 9, 2015 Have you configured mix craft to use the UX2 and it's ASIO driver as the audio recording and playback device? If so, I believe you should be able to select either of the UX2 inputs as the Source Input when arming and recording a track in mixcraft. Quote Link to comment Share on other sites More sharing options...
TheRealZap Posted January 10, 2015 Share Posted January 10, 2015 you have to go into the line6 control panel applet to change the inputs. Quote Link to comment Share on other sites More sharing options...
gary9605 Posted January 10, 2015 Share Posted January 10, 2015 you have to go into the line6 control panel applet to change the inputs. Where would I find that control panel? Quote Link to comment Share on other sites More sharing options...
TheRealZap Posted January 10, 2015 Share Posted January 10, 2015 In the windows control panel with all the other control panel applets. I think it's called line 6 audio midi. Quote Link to comment Share on other sites More sharing options...
Brazzy Posted January 11, 2015 Share Posted January 11, 2015 Where would I find that control panel? Hit the "Windows" button or open the start menu and then type in the search bar "Line" you should see "Line 6 midi" as an option to select. 1 1 Quote Link to comment Share on other sites More sharing options...
stavrio Posted August 22, 2020 Share Posted August 22, 2020 I had the same problem on my mac with my line 6 ux2...Search in spotlight (line6 midi) and then go to (recording) and map there if you want (line1-2 on instrument or mic) as input.and then go to logic and there you are. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.