Jump to content
Sign in to follow this  
StationGrey

Mk2 locks up on FX settings

Recommended Posts

I have posted this as a reply in a previous thread, but it's probably a bit lost so thought it worthy of a thread.

 

I've just taken delivery of a brand new Mk1 V 60w, and after a quick play with the default settings, I did the v2 update with no problems.

 

Now however, I can't touch the knobs when on FX setting at all or it all locks up. I can change everything else  - scroll through presets, change 'amp' settings on the knobs, adjust volume etc - but when on FX if I try to turn a knob it initially displays the setting value and then that's it. Nothing can be changed, even volume or amp presets - it carries on working so you can continue to play, but you're locked forever in that setting at that volume until you switch off/on at the back.

 

FWIW, although I only had a quick play with the v1 firmware, it definitely didn't do this and it worked fine! Also of note, with my iPhone plugged in I can make adjustments fine through that, and save/edit etc, so I have been able to play with the FX, just can't via the amp directly.

 

I've tried a factory reset from the Home menu as suggested in the other thread, but makes no difference. Have raised a ticket with Line 6 support.

 

There was one other person who mentioned this deep within another thread, but I haven't seen anybody else mention it. Is everyone else working ok with v2 on a v1 amp?

Share this post


Link to post
Share on other sites

Good news!

 

I tried reinstalling v1.05 and then installing v2.0.0 again and all is well :)

 

So, nothing to see here, move along please.

  • Like 2

Share this post


Link to post
Share on other sites

Don't know if you guys ever figured this out, but I had the same issue.. I backed down to 1.0.9 or something, don't touch anything else, do a reset on the home button, THEN updated to 2.0  Worked fine for me.. good luck

Share this post


Link to post
Share on other sites

Glad this solved the update for you.     I'll have to mess with the FX nobs and see if I'm having this problem and then try the approach if it's an issue.     I'd been primarily adjusting from the Spider Remote and USB cable.

 

I suspect we'll see a 2.01 in the future that works to resolve the occasional hang issue post upgrade.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×