Crugixx Posted June 16, 2020 Share Posted June 16, 2020 Hi everyone, I do have a Line6 Helix Floor, not LT, and I noticed that my expression pedal gets loose after using it for some swells. I have to tighten the screw at the side again and again which is kinda annoying. Does anyone have a solution for this or experience with it? Thanks in advance! Quote Link to comment Share on other sites More sharing options...
rd2rk Posted June 16, 2020 Share Posted June 16, 2020 I set mine once, four years ago when I bought it, haven't touched it since. Led Boots? :-) Quote Link to comment Share on other sites More sharing options...
Crugixx Posted June 16, 2020 Author Share Posted June 16, 2020 Sorry, but your answer is not helping me. I don't think that it is me putting too much pressure on the expression pedal Quote Link to comment Share on other sites More sharing options...
rd2rk Posted June 16, 2020 Share Posted June 16, 2020 37 minutes ago, Crugixx said: Sorry, but your answer is not helping me. I don't think that it is me putting too much pressure on the expression pedal Sorry, but that was the best I could come up with. To be clearer, my experience (which is what you asked for) is that the the expression pedal on the Helix Floor is a VERY robust device, and I can't imagine ANY degree of NORMAL usage (I don't SWELL, but I WAH a lot) that would cause your problem. If it's not Led Boots (reason for the smiley :-) ), then maybe you somehow got some grit in the mechanism that caused an unusual rate of wear, or maybe you lucked out and got a defective unit? Just guessing here. Is your Helix still under warranty? Quote Link to comment Share on other sites More sharing options...
Crugixx Posted June 16, 2020 Author Share Posted June 16, 2020 Yeah, I understand.That's what I heard as well. I got the sarcasm :-) I bought it last December, so I guess: yes, it's still under warranty. Quote Link to comment Share on other sites More sharing options...
nikshenkov Posted February 14, 2022 Share Posted February 14, 2022 I have the same problem. Did you solve the problem? Quote Link to comment Share on other sites More sharing options...
HonestOpinion Posted February 14, 2022 Share Posted February 14, 2022 Any possibility you are not tightening the screw enough (don't overtighten). I also have never had this issue over many years of usage. That is definitely not typical behavior for the expression pedal. If it is still under warranty, I might consider having Line 6 resolve this. Almost sounds like the nut or screw is stripped. I would contact support. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.