shemeshg Posted December 8, 2020 Share Posted December 8, 2020 Though 3.01 solved the corrupted audio, when played with piano through insert ½ (stereo) You would notice that the Left channel (1) is much stronger then the right channel (2) To reproduce: 0. make sure 1 and 2 inser are in ‘INST’ mode and not Line [In line mode it would be less noticeable] 1. Connect Helix LT to computer via USB. 2. Make sure you are on Empty patch. A: 1. Send same signal level to 1, and 2 [from synth or electric piano] Look on your DAW monitor, and see 1 is stronger (Much stronger). 2. replace jack 1 with jack 2 to ensure it is not a cable issue B. Make sure other things are correct - Send from Guitar to Stereo USB should be ok Quote Link to comment Share on other sites More sharing options...
phil_m Posted December 8, 2020 Share Posted December 8, 2020 Do you have Return 1/2 selected as the input for the Input Block? Quote Link to comment Share on other sites More sharing options...
PierM Posted December 8, 2020 Share Posted December 8, 2020 I had this few weeks ago, with 2.9x. I fixed resetting Globals. I had/have no idea when and how this started, but at some point I had the left Returns, way louder than right Returns, at impedance parity. Anyway, resetting Globals restored everything to normal. Quote Link to comment Share on other sites More sharing options...
shemeshg Posted December 8, 2020 Author Share Posted December 8, 2020 [Yes it is when having 1/2 as input block] After resetting global it did solved it and can not reproduce the problem any more. Now 1 and 2 have same level tested on my daw... == can close thread == Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.