Smooth v1.20 F/W update - my method

[jpdennis]

As most know from the Helix Floor I had, and making sure I was logged into the Stadium device;

 

1. I export my presets because in my world my backups have backups. 
2. I then entered maintenance mode to create a backup. 
3. Next, while still In maintenance mode, I reset the Stadium to factory default & shut it down using the maintenance mode button for that.  
4. After logging into the Stadium desktop app, I used the app update feature on my PC to update the app first. 
5. While waiting on the app update process to complete I started the Stadium, reconnected to my network and entered the password (reset to default requires that step), logged in to Line 6 on the Stadium, and started the F/W update download. 
6. While waiting for the F/W download to complete, I went to the Line 6 site download for the latest ASIO driver download since it is not automatic at this time, installed it, then rebooted my PC again.
7. The F/W update was ready by that time and, after a few minutes, my Stadium was successfully updated after which I turned it off.
8. I then restarted the Stadium in maintenance mode, restored from backup, then shutdown again.

 

While that is a lot to type the time went rather swiftly and successfully.  That is my experience, YMMV.

 

jpd

[glideman]

I've only built a few presets that are extensive so I just went ahead and upgraded without even backing the presets up to the computer.

 

Worked like a charm!

[silverhead]

On 12/17/2025 at 8:57 PM, jpdennis said:

As most know from the Helix Floor I had, and making sure I was logged into the Stadium device

.....

6. While waiting for the F/W download to complete, I went to the Line 6 site download for the latest ASIO driver download since it is not automatic at this time, installed it, then rebooted my PC again.

.....

The latest version of the ASIO driver (v0.0.3.12) is bundled into the Stadium app download package, and is installed with the app (unless you deselect it during the installation process). You should not need to install it separately.