shermatron Posted April 28, 2014 Share Posted April 28, 2014 Is there a way to decrease the bass levels? I get way too much bass When I play/record the guitar with the output connected to my PC. I have the bass knob turned all the way down in the pedal AND my guitar. And i still get a little too much of bass.. Any help here?I have an ESP LTD AX-260. Quote Link to comment Share on other sites More sharing options...
arislaf Posted April 28, 2014 Share Posted April 28, 2014 Go to cabin's DEP and increase the bass cut off up to 80hz about. Quote Link to comment Share on other sites More sharing options...
Rewolf48 Posted April 28, 2014 Share Posted April 28, 2014 Some of the models can be really boomy/muddy, as with many things HD there are lots of options, not all of which will work for your specific set-up. Try reading http://foobazaar.com/podhd/toneGuide/ which is a really deep guide Some things you might try include: Increase the "Lo Cut" in the Amp Deep Editing Parameters (DEP) Change to a different Mic model Change to a different Cab model - open back are less boomy than closed back cabs Reduce the model master volume (DEP) - the cab when pushed really hard adds som The real world technique often uses a Tube Screamer with low gain (including zero) before the Amp but other stomps can do as well Add an EQ before the Amp (same as the above really) Add an EQ after the Amp 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.