Please ensure Javascript is enabled for purposes of website accessibility Jump to content

jmjmeyers

Members
  • Posts

    23
  • Joined

  • Last visited

Everything posted by jmjmeyers

  1. All of the banks are empty except #01 ?? makes me wonder if you did the factory reset on the amp after the amps firmware upgrade completed? All the banks after bank 01 should not be empty, you will have some empty slots way down into the banks I forget somewhere past the accoustic tones past bank 27 but you should have many banks populated, each with 4 tones. To factory reset hold down the big volume knob and tone button together during a power on. BE WARNED though.. if you do that you will lose any custom tones you saved to hardware as its going to factory reset over them. You can protect any of your custom tones by saving to Mytones and maybe that is where you already have them for safekeeping. When you tap the Amplifi "amp" icon on the main IOS Amplifi app page you should see many banks and 4 tones each in them, again way near the end are some empty banks where I have saved some of the first four factory tones in bank 01 and then put my fav tones in the 01 A/B/C/D as I will grab and go at times without a shortboard.
  2. Hey pappywatts I am having trouble finding that exact bag on ebay and the picture link alone does not seem to help. If it is not against the rules please post a link to it here as I want to buy one for a 75 I just picked up or provide any more descriptive ebay search info that might help find it. I have tried Harrison's Store and Boss, Boss New York and nothing is coming up. There are so many bags it could take days to find without more info.
  3. That is what I thought too, but try this; hit bank up twice then hit A or B or C or D very quick. Not sure if best way but works for me and I have both a 150 and 75 now (and I just got done upgrading the 75 to v1.01 and testing it fully today) and works on both of them, 75 and 150 this way. Maybe you only have to hit bank up once and the A, B, C or D quickly, try it both ways. I am fairly certain I hit bank up or bank down twice and then hit A, B, C or D very quick. Once done your in that bank with all four tones selectable via A, B, C, D. I kind of do not even think about it any more and I have shutdown now today.
  4. I got this on my 150 with shortboard mkii plugged in. I was saving one of the tones from the 05 bank A tone to MyTones. Then went into MyTones and tried to save to hardware to put it in 01 bank tone A (wanted it there incase no Amplifi app up or shortboard mkii plugged in while using the amp) and I got this too: Hardware not responding, repeatededly for that matter. So, I turned off the Amplifi 150, turned back on, now bluetooth would not connect no matter what I did on the Iphone or Amplifi. So I turned off and back on the Amplifi 150 w/shortboard mkii still plugged in, turned off the Iphone completely, turned Iphone (5s) back on, then logged back in to the Amplifi app on the Iphone and connected ok with bluetooth. Then went into MyTones, selected the tone and in MyTones at top selected Save to Hardware then it presented all the banks I tapped 01 bank tone A on the iphone and it showed up there the name of the new tone, then I hit Done on the right upper corner and it did it. I powered all off and back on several times to make sure this was not a fluke and it was persistantly there in 01 bank tone A. Thing is I can't say what fixed it/worked-a-round it, all I can say is I had this problem persistantly and was able to do these things above to get this done. So unclear if this will help others. I think turning the Iphone off completely had the most to do with fixing this or work-a-round what was occuring anyway... I will test this again a few more times and report here again if it occurs or if I can find a gauranteed fix/work-a-round vs. dumb luck fix/work-a-round. Forgetting and relearning and re-pairing bluetooth, logging out of Amplifi app and then logging back in, turning Amplifi 150 on and off - these things did nothing to resolve this non-connecting bluetooth or save to hardware. Try killing the Amplifi app completely on your IOS device or power IOS device off and on or perhaps your not doing it as I did. You will have to relogin to the Amplifi app of course after power on and off on IOS device. Even with no shorboard mkii you should still get bank 01 and A, B, C, D as save to slot options in the Amplifi app. Also hitting the Done is rather a key point in the process. Sorry I can only say what I did above and hope it helps. Will post again if I can provide a more clear fix/work-a-round. My point though, it does work/did save to hardware for me and I am on the latest for IOS version on Iphone 5s, Amplifi app and Amplifi firmware with a no hum with shortboard 150 now.
  5. I just will report I am getting a response to my problem now from Line 6 Support. I asked the forum how the repaired items come back from Line 6 which I think is a reasonable question for the forum.... but I am going to send it in for the fix and hope for the best. This is the first of two 150's I need. I think I will have to try the second one to see if it has the issue, it was said they know what it is so at some point there should be inventory showing up without this issue. I need two, one to keep locally and one to be remote where I practice. If anyone knows what serial number kicks off the 150's without this issue please do respond here at the forum with that info. If complaining is not liked or misplaced I understand but my ticket did disappear and now Line 6 said why.
  6. The Line 6 website is bad enough. Open a support ticket, you will need registered product, which I do have. Once done you will be able to open a support ticket. My ticket open sent an email to me saying would be responded to in three days, upon login three days later I see my ticket is gone and no email came to me about this. I have now opened another ticket. Perhaps Line 6 does not understand that we can dump their products in a heartbeat on Ebay and walk away to find another place to buy our music gear? What kind of treatment of customers is this... Biting my wrist in agnst already and havn't even sent my product in to Line 6 for repair yet? I have hum in Amplifi 150 when FBV Express MKii is plugged in and I want it fixed by Line 6 not some local shop. I have seen the pile of amps all piled on top of eachother for repair that occurs here in my local amp repair shops. Might as well throw it off a cliff as that is how it will look after the repaired amp comes back from a local shop. The Amplifi 150 is rather elegant looking. I would like to get it back looking near to as sent in. I have sent pictures of "the sad pile of repair amps, many in the $2K range..." to others in Nashville. I can only hope Line 6 treats products, their products in for repair, better than this. If stuff sent in to Line 6 comes back all beat up and scratched up someone let me know now and I will put this one up on Ebay right now instead of sending in. As it is Line 6 seems to rebuff support by their dirty little website practices. Today I also created a rediculous support profile that asks all about my operating system and cpu type and speed I am using. I hope having that helps even though has nothing to do with my problem. This is my first experience with Line 6 in this regard and I AM NOT LIKING IT now so far...its and epic fail. Appears to me if you open a support ticket you better log back in quick within a few days to see what is going on with it! And now I get that and will after the slap in the face Line 6. NOT A HAPPY CUSTOMER, does that even resonate with you Line 6?
  7. Just did an Ipad mini test not sure of ipad mini version the one right before the retna mini came out. This had prior IOS version prior to 7.1.1 and Amplifi app 1.01 was still on it and worked surprisingly without any odd errors upon login. It would not update to the new Amplifi app, wifi on, app store autoupdate on but would not do it. So updated IOS on this ipad mini to 7.1.1 very soon after it updated the Amplifi app. Verified the new app was on it 1.01.1 and logged in and worked fully OK so far. This is the lowest end ipad mini you can buy wifi only. Hope it helps ipad users but it is just a slightly less than year old ipad mini bought brand new.
  8. Updated and working on my iphone 5s too with latest IOS. Off the fence and "back In". If you like your Amplifi you can keep your Amplifi...its a keeper again. No problems found.
  9. Update - forget what I said, I don't know what is causing this. My iphone updated Amplifi app crashes, so I used my sons Ipad Mini (non retna model) to try out the new Amplifi app, I got this very error there now multiple times Failed With Error 15877 (no Token!)I do not know what line 6 did but the hole they have dug seems even deeper now, include ipad which has issues and iphone of course where the app just crashes. I am waiting for the iphone fix too but the ipad now seems to have issues as well from my viewpoint. If it didn't sound as good as it does by now my Amplifi would be up on Ebay...but as it is I have 4 good presets stored in my amp, at least. If this kind of things keeps up however, I for one, am jumping ship. I don't care if I have to take a loss, I do not keep stuff that doesn't work well even if it was needed to solve a partiular need/problem. Only saving grace is it sounds fantastic, if they change that, then I am out.
  10. On my Amplifi 150 with Korg Beat Boy not loud enough on Aux in using headphone out. Laptop is better but still not enough. Picked up an iboost 800 and that made a big difference. Now I can crank up some youtube tunes even and blast them via the Aux in with the iboost pusing it harder and get enough volume and low end to get complaints from those a few floors up in the house. To tune this up since it could use an equalizer, I choose in W7x64 sound setting for equailzer and "club" setting and that cut some of the too much low end and was just right. So a line level amp with an equalizer would be the thing to really have for this. The bass out of the 150 is just what I need however as I am making up for no bass player at times. Backing tracks custom mixed purchased from a karoke sight sound great now. I use this to make up for a missing band member during a jam and now the volume is where it should be for the custom backing tracks. Not trying to sell any products here, just solving my problems for my specialized need, wish the iboost (a nice little box by the way) amplified even more but it did the trick, enough to get complaints when tested this way at home and the Amplifi red volume band is only 1/4 up on its dial. Will see soon how it works with my loud drummer but I think it will because now the aux is kicking some serious volume. I will replace the iboost with a line level amp with equalization as soon as I can find that better solution. No wierd static, no impedance issues so as of today happy with what the iboost does especially when used with a laptop audio source for the 150's aux in.
  11. I do not have a solution per se' but will tell what I know based on my exerience with this same error. Used my son's Ipad mini and never got this error ever. His Ipad mini had tunes on it bought via Itunes. So he had some songs on it and I am just pointing that fact out. I got a new Iphone, had no itunes songs myself and it always got this same error you mentioned, even so the Amplifi App would work but no tunes to tone match against. Log in on Iphone, get this error then I think I said OK and then the Amplifi App worked despite it. I had MyTones to select from as I started first using my sons Ipad mini which did tone match given it had tunes on it. Didn't seem to be caused by the Iphone's bluetooth or wifi being off and I always had wifi turned on before launching Amplifi app. But I did these two things and not sure which may have fixed it as doesn't occur for me any longer on the Iphone. 1) bought one itunes song. 2) enabled the Amplifi App to use cellular data. If I had to say which fixed it probably having an Itunes song on the Iphone. I don't get the error any more on the Iphone and never ever got it on my sons Ipad mini. My son has his own Itunes account for his Ipad mini. I would think Line 6 support would know exactly what is causing this, perhaps open a support issue with Line 6. If you have no tunes buy at least one and see if that fixes this.
  12. Just reporting that I decided to return the FBV Express MKii and ordered a shortboard instead. It sounds like a ground loop hum to me but not knowing any techincal details I don't want to risk my 150. I have found a few Spider amp posts that also talk about hum as soon as the Express is plugged in, but no resolution for them either. Seems when the complainer doesn't respond in time they close the support case. Since no one opened a case for the Express, me too in that... I will go the route of least resistance. I don't like a big plus size floor board and preferred the Express size board, hopefully the shortboard in the flesh won't be all that big. None in the stores, had to order it on line.
  13. Found this, why this info is so buried, I just do not get it, should be easist info to find! There is a switch under the front of the expression pedal. I have pressed on it but I guess it requires massive downward pressure to activate. Oh joy I can try out the wah now, which is why I wanted the Express in the first place. The hum is no big deal, just like having a tube amp sitting there, I know it should not hum but its something I can accept if the wah works.
  14. Absolutely raged on my 150, no buzzes or rattles. Went so far I have a lot of other things accross the room buzzing like crazy so I had help to spot and assure nothing coming from this 150. Perhaps there are good ones and bad ones. I am not using a tele or strat or single coils, heavy low end used with dark guitar with high end humbuckers and emgs too. Played it like a raging high gain stack was in the 150. Now usually the drums are rattling so bad there are going to be buzzes and rattles in a live situation or even practice. I can see where recording with buzzing would be a problem. Beat it to death trying and no buzzes as I too wanted to be sure.
  15. Picked up an Express MKii floor unit. With the 150 there is a hum I would say no worse than a large tube head sitting there idling type hum. Worked great for A,B,C,D presets and the tuner and as Volume Pedal. Volume Pedal seems to be the default, midi CC settings are right for Wah but can't seem to get it to become a Wah, even with a tone preset on via Ampliiy App that has a Wah turned on and Volume turned off and then that preset selected. Wah can't be moved in position like others can in the app. Does this App my tones preset have to be stored to the amp before the Wah will work? What is the trick to get the Express to go into Wah mode with Wah LED on and all? To solve hum via 75 is not a solution unless you like the smaller cab and smaller speaker. Playing high gain enough the hum is not bad but not being able to seem to get Wah to work is a problem. Any help on how to get Wah to work/get Express to act in Wah mode? I might keep and not return the Express floor unit if if the wah would work...
  16. jmjmeyers

    Aux In

    I use a Korg Beat Boy. Those with better don't laugh, its compact and does just enough barely. I use it to play back wav backing tracks and drum backing. For quiter play its loud enough and clear but for band situation it is not loud enough so I am looking at getting one of these to boost it or something like it, but I think this would do it. I am not affiliated with any seller of these devices, just trying to get more volume from the Aux-in from the Korg Beat Boy. Perhaps other mp3 type players put out a higher line level and would not need this but the Beat Boy needs it but then its the headphone jack on the Beat Boy I am using with the Beat Boy's volume control maxed. My intention is for Aux-In level to be able to peer match in volume with a loud guitar played through a 150, all being loud enough to play with heavy hitting drummer; both guitar and backing track. TCC TC-780LC Stereo Line Level Amp / Booster with iPod Jack
  17. So someone here took their Express, used the stores, tried out and seemed to indicate the hum exists with the 150. Someone else here replied that they don't have a hum with their Express used with the 150. This seems inconclusive, which is it? Is ths express to be avoided or is this a take your chances, you may have a hum or you may not situation? I am interested in the Express for the wah. Comments indicate made out of plastic or not built the greatest perhaps but I don't want a huge massive board on the floor, just enough to use the wah and switch between 4 presets upward/downward. So is a flawed combination or not Express + 150? Anybody call Line 6 Support about it and if so did they confirm this as a problem? Not having even looked at this Express in the box does it come with the connection cable for the amp?
  18. I have to travel with mine. The box it comes in is no Marshall box so it will only last a short while. Looking for a cover to buy or even ready made as compact as possible road case. I know I can have one custom made at a high cost. Using a nylon deskside computer cover for now big enough to fit. Searched and found nothing for sale so far. I can't be the only one who would like at least a good cover. I know Line 6 probably didn't count on it being dragged around expecting instead to have it sit permanently in one place so I may be going beyond initial intent with this request. I get that but I still need something.
  19. I appreciate that suggesting but I could not tell anything. After that update even after shutdown of all multiple times and the Oops message from the Amplifi app I could not see anything about any update, all was greyed out as in unavailable. There must be some postback/callback going on where their site registers what serial numbers got the 1.00.5 update installed and something perhaps was down perhaps for the update website even though it fully did update and complete as it said so. Its been a few hours I think since this occured at least, tried it again now (not the update, as that said it was done) and all is fine and shows 1.00.5 is installed and all is working now. Led lights so far all coming on equally dim and same at power off on 1.00.5. The above Amplifi still shows 1.00 as others also indicated so that doesn't mean anything and is a bug I think too. Default presets for 1.00.5 are the same as in 1.00 version, named the same and sound the same. I have not found a way to save the factory default presets to My Tones however so I won't overwrite any just yet. Search on the name won't do it, there is no American Clean found when searched. Clearly one must have what they need in the 4 presets in just in case the website acts up form. Never did get the box out and now I won't but this was a wake up call to have my 4 presets very sufficient. Playing live you could never rely on the website or I will assume that upfront. 4 presets are enough for me....my Marshall only has two realistically anyway clean and distortion channel. As I understand it the Fender Mustang can't do more than one effect at once so this is still the best device for me as long as the website dependancy is well understood/kept in mind. What I would like is some device that could keep a bluetooth "sendable to the amp" repository of of My Tones without any need for the line 6 website for Amplifi app login. I would pay for a seperate device that did just that. Or Line 6 could make the app work without the login to the website required or make that optional, storing My Tones on the IOS device instead. Being a mobile device application and web developer I know what is possible and I would like Line 6 to fix/remove the persistant dependancy on the website and I know they could if they wanted to. All is well again, if you fixed something thanks Line 6. A lot of jamming and practice occurs on Saturdays, not a good day for website maintenance, just saying..
  20. Well. just great... I updated to 1.00.5 and all seemed to go well. Finished, rebooted. Bluetooth connects, now when I login to the IOS app it says this exactly " Oops! We encountered and unexpected error. Please try again later. Logged in " there is a in blue text "OK" and this is all in a little white box on the IOS app. So the amp works as a basic stand alone amp. Can't really tell if 1.00.5 is in but it finished completely. I get this Opps message on the IOS device, IPAD Mini even with it totally powered off and back on and all reset, drop bluetooth reconnect nothing seems to make a difference. So lets see using this amp to play with the band when I can't have the band here, I go out of state to play and then what if this happens? I am not liking the website control Line 6 has over this amp. I worried about website problems and now I have one and there is no way out. I logged in via a computer fine its something to do with the websites account knowledge of my device now even though it blue tooth connects just fine using IOS device. I will wait awhile and try again, maybe and hour from now I will try again and now I am going to go find it's box, just in case.
  21. Does anyone know where the changes for the update v1.00.5 are published? Why should I update? Anyway to go back to prior if I don't like this update? I had an Amplifi 150 with original and then this updated firmware and the startup led C didn't come on at power up with either firmware, but no problems, all worked. That one had orginal and the update and I swear after the update bluetooth disconnected more after the update. So I just couldn't stay away, given what I do; play with a band occasionally out of state, this amp is for me and everything works perfectly except now for this one led b is more dim than the others on power up. I ignore this now as a non-issue but I borrow my son's IPAD mini (not the lastest with the retna whatever it is display) and I have no disconnect problems at all, I mean none, in fact I am wondering why even bother with the upgrade? I like the presets that came with it just fine and perhaps if I go to the update v1.00.5 I won't like those as much and have no way to go back? Are the four presets the same in the v1.00.5 update or different? I am worried Line 6 is knee jerk reacting to complaints and fixing something that doesn't need fixing in v1.00.5 or fixing things for specific IOS devices maybe. Who has more data on this update, what it exactly fixes etc v1.00.5 ? I already talked to Line 6 support about the leds at power up and seriously doubt they will have any answers about this update, its like a sales person is handling the support there instead of technical people with technical answers. Sorry Line 6, you have a fantastic product here but you need to make some in house support changes, if you didn't know that already. No back to factory defaults info is available either anywhere. I fear change, since I like now my second 150 as bought NIB. Every day I wonder well should I try the update today or not... If I like my 150 I can keep my 150, as is, maybe? Thoughts?
  22. Thanks for your reply regarding the start up lights. Mine obviously has a hardward problem with LED C, it is not that the LED does not work its characteristics for bias tollerance for current sink on off state are a little different than the others most likely, given LED C works when using for actual presets, just doesn't change to on state during the weak current sink during the power up power down phase, like the A, B and D led's do. I called support about it this AM. They could not confirm no impact down the road but did consider it to be a definate hardware problem, my decision to send in for repair or to take back to the store. Alternately I could have just kept it but decided to take it back to the store. The box is a bit thin, I hope they don't ship them in this box alone without any outer box. This was tough as no more new in the box, only demo's available for replacement. I play Humble Pie and the "are you ready dirty" preset out there worked perfectly for that same song by Humble Pie, with a Les Paul I don't think anything sounded so dead on for it from the live at the fillmore days. I am not done with these amps, just done with this first try and hope I do not live to regret returning it. The Rob Chapman and Mountain presets also were excellent at least on this 150 I had. Borrowing the family IPAD worked for the time I had it, if I get another I suppose that will work again but I did have about 30 or so patches on line built up in only a few days. For the next one the four preset LEDs are the first thing I will check. Oh saving presets per the manual mode worked great with no IPAD connected, with IPAD connected you do have to do it via the "save to hardware" feature in the app. To Line 6 all I can say is, "I'll Be Back".
  23. My presets A,B,D lights (leds) are on and C is completely off at power on start up. C light (led) works like the rest when manually via TONE button selecting through the presets on the amp, lights up as it should then but not at power up with the rest. Also while IPAD blue tooth connected, I can only use SAVE TO HARDWARE feature in the Amplifi app to save a preset in one of the four slots and it does work fine. Holding down the Tone button to save a preset (like the manual says to do) does nothing when in IPAD connected mode with Amplifi app up and runing and I havn't tried this with no IPAD connected as I don't want to lose any of my just absolutely epic sounding 4 present presets and would not know how to bail out to abort the manual save without any loss of present presets. No problems I know of after testing almost all features using a Les Paul, the obsessive nature in me would expect all four LEDs to be the same brightness at power up so that leaves me wondering...what others see in their 150 at power up? Don't have a IPAD right now (I borrow the family IPAD for now at nights until I get my own or Iphone soon) but the firmware is latest that ended in .05 I believe and the C light was out as well on power up with the prior version original as purchased firmware as well. For anybody with a 150 is this normal? FWIW dare I say here I love this amp....
×
×
  • Create New...