Jump to content

simbo

Members
  • Content Count

    36
  • Joined

  • Last visited

Everything posted by simbo

  1. Thank you very much moogary that has been successful. Have you any idea why it wont install automatically with the install wizard? Regards, simbo.
  2. Hi, Can anyone please help me. I have tried to update the drivers for monkey in the normal way for my pod HD 500 I have done this on numerous occasions without any problem but now I am getting a message telling me I need to do it manually as there has been an error. I have manually downloaded the driver updates but don't know how to put them into Monkey. Can anyone help Please. Regards, Simbo
  3. simbo

    Hall of Fame effect

    Well thanks for all your help and input brue58ski CHEERS. Simbo
  4. simbo

    Hall of Fame effect

    Hello Indianrock2020, I am just playing for pleasure but thanks for your input. Regards, Simbo
  5. simbo

    Hall of Fame effect

    Thank you very much for taking the time to give me all this information brue58ski its's really appreciated and I will give your suggestions consideration. It has been sometime since I have used these forums and seems to have altered a little, how do I give you a rating? Kind Regards, Simbo
  6. simbo

    Hall of Fame effect

    Cheers huubdijckmanns.
  7. simbo

    Hall of Fame effect

    Thank you napynap, I will give that a whirl CHEERS. Regards Simbo
  8. simbo

    Hall of Fame effect

    Thank you so much for your help with this Brue58ski it's good to know some people know what they are talking about. you've given me plenty of good info to follow up on. Can you recommend an effects board that you would rate above the Pod HD500. I ask because you obviously now your stuff and the PodHD has quite allot of stuff to contend with. Regards Simbo.
  9. simbo

    Hall of Fame effect

    Hello Blue58ki, Yes that's the sound i'm looking for. Is there a particular amp model I should use or a specific reverb? Regards, Simbo.
  10. simbo

    Hall of Fame effect

    Hi Guy's, Can anyone please tell me how I can achieve that Hall Of Fame effect that you hear on songs like Wicked Game. And how to get the effect that Lindsay Buckingham gets in his solo on Landslide. I am using a Pod HD500 through a Line6 Spider Jam. I would be grateful for any input CHEERS. Simbo.
  11. simbo

    Sustain

    Hi, Thanks for your input on this. Is there a fx box I could buy that you could recommend that would give me the sustain. Regards Simbo
  12. simbo

    Sustain

    Hello, Could anyone please tell me were I can find Sustain in the effects on the pod hd500 all software is up to date and running the latest version. Regards Simbo. :unsure:
  13. Thanks so much for that silverhead, that's grate.
  14. Hello, Can anyone please tell me when I have downloaded a customtone how do I put it into my own pod hd500 and how do I select were I wont to put it on the pod hd.
  15. Thank's guys its all a big learning curve, and I am just at the start of it. And having my fare share of problems with the setup, such as thumping when changing patches with the HD500 and interference.A bit peeved at the moment to say the least when you shell out this kind of money for a rig. :angry: CHEERS. simbo
  16. Hi casparello, Just out of interest did you by any chance get a thump through the cab or speaker when changing patches and a bit of interference. simbo
  17. Hi vcuomo, Thanks for that info. I am also going through a HD500, can you please tell me do you get a thump noise from the cab when you change some of the patches and a fizzing or humming when voicing ll and lV are activated on the DT25. simbo
  18. Hi Guys, Got a new DT25 Head and I still have the same problem of a thumping noise when I switch some of the patches on the HD500. So I contacted Line6 and sent the pod hd back to them to look at as it seems that it is the problem, they have replaced the PCB and sent it back and guess what it is no different, the guy I spoke to at Line6 said he would need to contact there department in the USA to see if they could throw any light on the issue, he said it might be a software problem. I tried rolling the flash memory back to an earlier version but it didn't do anything. Has anyone else had this problem or heard of such a problem as it seems to be a new one for Line6. I thought it was only doing this when connected with the Line6 link but I have tried it again with the 4 cable method and it still does it. But which ever method I use it doesn't do it with every patch its driving me up the wall. Can anyone HELL PLEASE. simbo
  19. Can anyone please explain why the volume values and other control values don't get displayed on the pod hd500 when the dt25 is in channel B but get shown in channel A when altering settings on the dt25. simbo
  20. Try this as it can be a cause of the pod switching itself on and off Not that I now anything but try this on the Pod, GLOBAL RESET; hold down the left arrow on the navigation button while you energize the pod and then calibrate the expression peddle, If the Onboard expression pedal of the POD HD500 does not sweep through parameter values as it normally would, you may need to perform a pedal calibration to reset the functionality of the expression pedal: Hold the down the RIGHT ARROW button on the 4 Way Nav Pad while powering the unit on, until you see the “Test Mode†screen (Pedal Cal, etc.), and then proceed with the steps below: If not already selected, use on the 4 Way Nav Pad to select “Pedal Cal,†as shown above. Press the VIEW button. Set the pedal to the minimum “heel†position, then press the A footswitch to set a value for the Duty Cycle. You’ll see the value set to “100.†Set the pedal to the maximum “toe†position, then press the B footswitch to set a value for the Duty Cycle. Again, you’ll see the value set to “100,†as in step 3. Press the C footswitch to prepare for automatic selection of the Scaled Pedal Value and move the pedal from min. to max. You should see the Scaled Pedal Values read “0†at the heel position and “255†and the toe position. If you get values other than 0 and 255, power off and repeat these steps, starting at step 1. Press the D footswitch to save the settings. You’ll be returned to the Test Mode screen and the Pedal Cal item will show a “P†to indicated that the pedal calibration is complete! Power your device off and back on again to start using it. ***Please Note: Re-calibration of the POD HD500's expression pedal is necessary after performing a Global Settings reset. Instructions for how to perform a Global Settings reset is available here. simbo
  21. Hi Guys, Can someone please tell me if this is the correct behavior of the DT25 head illuminated front panel. First standby switch in standby and power switch to off, second Power switch on with other switch still in standby everything on the panel lights up and then the class AB and class A , A, B, Triode and Pentode and voicing lights go out for about 3 to 4 seconds and then light up again. ( the Volume and bass light and other control light stay on throughout) Also voicing 1 and voicing lll are not as loud as ll and lV. I can also hear the amp being switched on through the cab when I flick on the standby switch.I would also like to mention that there is allot of hissing from the cab when using voicing ll and lV with volume turned up.Is all of this normal behavior of the amp. simbo
  22. Hi toneman2121, I have just tried the global reset but it hasn't solved anything. The company I perchesed the head from are going to replace it, so if the new one does the same thing then it is obviously the pod that's the problem and I will need to send it back to line 6 for repair. But thanks very much for your input it is good info as I didn't know about the global reset and re calibrating the expression pedal so thanks for that. simbo
  23. Hi, yes I tried different cables and the correct ones digital 110 ohm, and the firmware is up to date I even re-flashed it to make sure, but no joy. simbo.
  24. I have narrowed the problem down to the line 6 link connection, I have done this by using the 4 cable connection and everything is fine. The problem being now is how do I check if its the pod hd or the dt25 that's the problem, anyone got any thoughts on the issue. simbo
  25. Hi Guys , I seem to be on here rather a lot, but what it is when I am changing patches with the foot switches on the pod HD500 I am getting a bad crackle through the cab of the dt25 on the change. Is this normal I just seem to have noticed it. It just happens on the initial change and I think if you where playing live it wood stand out like a sore thumb. Regards, simbo
×
×
  • Create New...