AntonisPat
-
Posts
31 -
Joined
-
Last visited
AntonisPat's Achievements
-
UX2 Static problems?
AntonisPat replied to Enanot's topic in Computer Audio Setup and Troubleshooting
Its a Vigier Excalibur with passive Seymour Dunkan PU's. I'll try the q-tip tip (pun intended :D ) and come back! -
UX2 Static problems?
AntonisPat replied to Enanot's topic in Computer Audio Setup and Troubleshooting
Hello all Last night I tried using the pod farm noise gate (the one on the top left, not an effet block) and I managed to cut a lot of the static noise, but to do that I had to set the threshold very high (past 2 o'clock). Is this normal? It makes me wonder because about 2 months ago I had that gate off and no issues with the sound whatsoever.. -
UX2 Static problems?
AntonisPat replied to Enanot's topic in Computer Audio Setup and Troubleshooting
Hello Triryche It's not a hum, its static. I tried a noise gate in my tone but it does nothing, so I'm guessing its clearly a HW issue. -
UX2 Static problems?
AntonisPat replied to Enanot's topic in Computer Audio Setup and Troubleshooting
Yes, when I hold the guitar strings it gets (way) less. But it is the same in all 3 of my guitars. And if i plug the same guitar with the same cable in the "pad" input the noise goes away Edit: i dont know if it has anything to do, but it is more evident in high gain sounds and less in cleans. But even in cleans its still there -
UX2 Static problems?
AntonisPat replied to Enanot's topic in Computer Audio Setup and Troubleshooting
Hi Brazzy thank you for your reply. It's not a laptop, its a desktop pc. I did everything you said and it didn't work. I even tried it on my laptop (both on power and battery) and i get the same problem. The static get louder as I turn the volume knob on the UX2. If I don't have a guitar connected there's no noise, but I can see the two meters on the front moving around the 46/56 values. I dont hear any static if I connect to the "pad" input but then the guitar sound is not good. Any ideas? -
UX2 Static problems?
AntonisPat replied to Enanot's topic in Computer Audio Setup and Troubleshooting
Hello all I've been having the same problem for a few days now. I've checked everything from the cable to the usb port of my pc and everything works as it should. Any ideas?? Is it a hardware issue with the UX2 ? -
Thank you d0gmA!! I cant believe I've searched everywhere only to find it was already downloaded.. THANK YOU!
-
Hi guys ..still no luck with this. I gotta say, its getting pretty annoying to have the stuff needed and not being able to use it..not blaiming the equipment but I still haven't found a way to make it do what its supposed to do.. please help! Thanks!
-
Quote from the FMV manual: “POD Farm 2†FBV MkII Control Presets To provide a nice “jump start,†we’ve created “POD Farm 2†FBV MkII control presets that can be loaded on your device using the Line 6 FBV Control application. These FBV MkII control (.fbv file) presets load a complete set of MIDI commands on your device for instant POD Farm 2 functionality! It is recommended that you download and load the FBV control preset on your FBV MkII device before proceeding with configuring the POD Farm 2 standalone application or Plug-In for your FBV MkII device. These Presets are available for download from the POD Farm Online Help site: • For FBV Shortboard MkII - Download the file named “POD Farm 2-Shortboard.fbv.†• For FBV Express MkII - Download the file named “POD Farm 2-Express.fbv.†I'm trying to find where I can download thes two presets from. I've had no luck from the software downloads section or anywhere else in the line6 site. If possible please explain step by step what i need to do and not just a link because I've had no luck with links so far.. thanks in advance!
-
I feel kinda stupid now but I still cant find it. I follow your link, go to Software downloads through there and it redirects me to the software download page, From there I select FBV Shortboard MK II / all software / win7 and all I can find is the Line6 Monkey updates. The "Learn more about how FBV Shortboard MkII can send MIDI via USB" redirects me to the manuals. What am I doing wrong?
-
Thank you both for your help. Could you also tell me where I could find the POD Farm 2-Shortboard.fbv mentioned in the manual? For the life of me, I've searched the entire Line6 support site but cannot find it..
-
Noone??
-
Hi all I'm not sure if this is the right category to post this topic, but here goes.. I've got a spider valve 112 MKii and an FBV shortboard mkII. I also have the UX2 sound card which I use with pod farm 2 software. Now I use the shortboard to do all the good things I can do with the Spider Valve, but I also want to use it as a controller for the pod farm. I've read the FBV manual and I've seen I can do that and also save setting patches for the FBV. My question is this, if I connect the FBV to my computer and farm2, change settings and save a patch and then unplug everything and plug the FBV to the Spider Valve, will it work as before? Or do I have to save a special patch for the SV somewhere and load it everytime I want to use it with my amp? I guess whatever the answer is, the same would be true for the FBV Express mkii, right? Thanks in advance!!
-
Format pc and ux2 pod farm licence
AntonisPat replied to AntonisPat's topic in POD Farm / POD Studio / TonePort
Thank you silverhead! I've got my presets backed up, I just didn't know about the licences. Thanks again! -
Hi all! This may be a silly question, but I've upgraded my hdd to an ssd and I have to format my pc to have the OS run through the ssd now. I also have a UX2 that came with a Pod farm 2 licence and so far everything works just fine. Do I need to do anything before I format my pc ? I mean will the licence be transfered automatically or do I have to unistall something before the format and re-install it afterwards? Thanks in advance!