guilhordas

I changed the usb cable and ethernet cable for new and nothing, the problem remains, the strange thing is that I do not have any problem to reinstall 2.0 through the pod, I just have a problem when I use the workbench through the usb interface

is 2.0 firmware?

and yet I use +3 or 4 db in patch acustic (5) on the workbench, is it this that is causing the distortion?

how you guys think is most likely to saturate the sound of acoustic guitar? increasing the compressor or increasing mixer? because i use mixer 10db

I've noticed a curious thing, every time I go to record the sound of acoustic guitars distort, and I did all the tests possible, I took out the compressor, volume decreases, treshhold, I changed my position, shifted in mixer and then I caught a empty patch and noticed that even then saturating in the bass, it seems a problem of the acoustic, the electric does not saturate,

THE ONLY THING NOT TRIED YET, BECAUSE I DO NOT OWN, IS ANOTHER USB INTERFACE, I ALREADY CHANGED CABLES COMPUTER. A WEEK AGO I USED MY ETHERNET CABLE INTERNET AND WORKED PERFECTLY, SO I concluded that SHOULD BE TROUBLE CABLE, BUT TODAY WAS TESTED WITH CABLE AND EVEN HAD THE SAME OLD PROBLEMS

thanks man iII try

the line 6 might think the problem may be with the usb interface or with my jtv, but the interface seems to work well, turn lights properly, the workbench always recognize the JTV through it, can you post a links of this product? thanks

the problem happened again, I'm going crazy, I already changed the pc, swapped cables, reinstalled the firmware, but I'm having the same problems again

you guys already tried to take the martin 12 and turn into 6 on WB? I did, and was very good, was at the same level of quality of jumbo (5), which in my opinion is the only usable live, (3) is too bad I guess,

the exact measurements of the strings would not ? E 0.0110 B 0.0140 G 0.0180 D 0.0280 A 0.0380 E 0.0490

The cable that i use with my jtv and pod is this http://produto.mercadolivre.com.br/MLB-511451194-cabo-de-rede-blindado-externo-ftp-preto-montado-c-3-metros-_JM , this cable works perfectly to use with pod but doesnt work to workbench

Today something strange happened, I went to fix the cable that was giving trouble in the workbench, but it worked in the pod, and to my surprise the cable is not defective, I used a device that measures 8 wiring cable and all were working, then I wonder why this cable does not work correctly with the uSB interface and workbench? and the strange thing is that standard cable network from my interenet works

yes, I didnt know it was not possible to install the 2.0 connected through the pod, I thought it was only possible by USB interface, but Phill warned me that it was possible

I want to thank the attention of all, I did find out, as Phil had said, The cable I use should probably be broken inside, but to connect to jtv in pod it works but does not work for the workbench. I was just picking up another ethernet cable and connect and worked, the problem was actually the cable. Thanks

I succeeded in reinstalling the 2.0 trough the pod, sounds again , but when I open the workbench gives the same problems, strange letters, models muted, what you think I should do phil?

I succeeded in reinstalling the 2.0 trough the pod, sounds again, now I need to install my bundle, this is the problem

I am trying to install in a pod but I got this error message attached below

Should I reinstall the models button on or off?

yes, but how will I connect the USB interface if the two sides are protected?

but it is possible to install the 2.0 with the pod?

the original cable that came in the jtv I have no more, but I bought this one http://www.ebay.com/itm/Line-6-25-Variax-Digital-Interface-Cable-/331024477628?pt=Guitar_Accessories&hash=item4d1298adbc from the link, which is also original. the 2 cables give the same problem I'm going crazy here, also already tested two usb cables, the only thing I do not have two is the usb interface.

I have 2 cables vdi here and 2 are giving the same problem, now jtv is no sound, only one or another model is sounding, I'm very upset because I have a gig tomorrow and my guitar is muted. what is your suggestion Phill?

you do not think the problem may be with usb interface or usb cable?

i have this original cable but it is also very thick and heavy, so I do not use. the cable that I use I've attached a photo for you to see. a question, if my cable not suitable it should not work, right? but as said before, communication jtv with the pod is perfect, the problem happens only in the workbench