gergoretvari

it wounds weak, like the if there was no gain on it. see above Thx for the info, i will check it out and report back as soon as i tried this Btw, is there a difference i would to use the jack input of my interface? I only use my xlr one because that's what everyone said online

I'm running through my helix lt to my focusrite scarlet solo via XLR and using phantom power, because otherwise the guitar sounds like it's "not enabled". I always used this method for almost a year now. Some guy told me that this will damage my unit. Is this true? Should i be concerned or i'm fine on how i use it?

Hello there! I'm at the beginning of starting my guitar cover videos, and I heard about preset changing through MIDI without having to use the footswitches. (I'm using Reaper) How can i achieve it, that when i'm recording my guitar my preset changes through MIDI automatically? Thanks in advance!

Greetings! Can i still sell my native license if i activated it already?

Thank you. I will contact another technician in my city then. Due to Covid-19 it's going to take some time, but i will be patient.

Is there a chance that they would repair it in my local guitar store? or does it need to be done specifically by Line 6 employees? also i bought the power supply from here (i think) : https://www.ebay.com/itm/LINE-6-POD-HD500-MULTI-EFFECTS-PEDAL-9V-3A-POWER-SUPPLY-ADAPTER-REPLACEMENT-UK/164036012603?_trksid=p2485497.m4902.l9144

Hi! So as the title says, my POD HD 500 can't boot up. When i start it up, the only thing i see is the Line 6 logo appearing in a loop, and wouldn't load the effects chains. This is kind a complicated situation.. So i've bought this unit (used) like a year ago, and couldn't use it once. The guy whom i bought it from didn't had a power supply to it. It took me like 2 months to get one from Ebay (UK) which had the UK power plug head (so i needed a converter). I'm from Central Europe (Hungary). It was strange because once i was able to boot it up to see the menu and such, but after days past and tried it to set it up with my friend it just gave up eventually. We weren't able to boot it up, we also tried to update it with the Line 6 Monkey, but the pc just couldn't see the unit via USB. After we tried to install the drivers it gave an error. I took it to a local guitar shop, where they replace the USB port since it was broken, but they also said that the circuit board was "short circuited" , and would need to be replaced. Which would cost me around 300 Euros, that's just Ludacris! (i don't really believe them, for my own reasons, but that's not the point right now). I can get it to "Update Flash Mode" while holding the "down" button on starting up but my pc can't detect the POD HD 500. As you can see in the screenshots i can't update the Firmware memory and neither the Flash memory. Also when i try to update the driver it gives an error message ("Failed to launch installer"). After that it takes me to the Line 6 downloads site to download it, which is fine, but after i install it manually it still says that there is no driver installed. What can i do to fix this? Do you think it's a power supply or a circuit board issue? I also tried it with multiple USB cables..