jiml6

Go to Global Settings > Displays > Main LCD Brightness, Scribble Strip Brightness. See if that gets you what you're after.

I don't believe there is currently a "Morley" mode in Stadium. To your second question, Volume, Wahs, and Whammy's bypass state is automatically assigned to the toe switch. Beyond that, you can assign anything to "EXP Toe" in Bypass/Control.

The IR files won't be ported over with the presets. You'll need to upload your IRs to the device via Helix Stadium Edit Librarian.

Using Preset Up/Down switches will not load an Empty preset. You should be able to get from your 1C-2C presets no problem.

This issue is fixed in the latest build, 3.83.

The dim white LED on FS2 is Flux Mode.

What is it turning into tap tempo mode from?

For that global setting, white is the color you want to have no light for a bypassed preset.

You can tell the RJM app you're using a Helix Rack and it will have the list of CCs preloaded. Very cool feature.

That is actually the firmware file. You'll need to download Line 6 Central in order to flash it onto your device.

Anyone who's experiencing this, can you attach the backup file that's causing the issue?

@shamasuva Weird. Can you attach a preset that's reproducing this issue?

I'm not seeing this. Did you factory reset your device after updating?

Make sure the global setting "Tap Flash" is on (Global Settings > page 4).

You can try loading the model (not the preset). Or, if you're in the GSG100 preset, turn up the Bias to 50% (the preset has it at 28%, and I think that's where a lot of the sludge is coming from).

Open a support ticket

Yikes. I would open a support ticket.

Go to your local C drive/Program Files (x86)/Line6/Tools... and uninstall any Helix drivers in the Driver2 Archive. Run those uninstallers. Reinstall HX Edit. See if this works. The latest Driver2 drivers are core isolation supported. Is your system core isolated?

Try these steps to recover your unit. 1. Unplug the USB cable from BOTH the back of your Helix AND the computer. 2. Turn your Helix device off and on. It will most likely boot into a screen indicating something has failed and the device has entered update mode. 3. Reconnect the USB cable. 4. Launch Line 6 Central. In a failure state, the device will not connect to HX Edit. 5. Select your device and try updating to the latest firmware again. 6. If the update still fails, enter update mode by holding down the footswitch, button or encoders appropriate for your device when powering on from the list below and try the update again using Line 6 Central. Helix Floor and LT: FS6 & FS12 Helix Rack: Encoders 1 & 6 HX Stomp, Stomp XL & HX Effects: Page >

Are you on 3.71 for both Helix Floor and Edit?

Can you describe your setup? Mono/stereo? Any specific global settings?

This was added in the latest firmware

I'm not able to reproduce this. Are you on the latest firmware (3.71)?

Have you updated to 1.02? Do you have any MIDI devices connected to your DL4?

HX Edit is for Helix and HX devices. You'll want to download Catalyst Edit here.