bclarke675

Monkey opened the page, but my mistake was listing the hardware as Variax Standard. When I switched the hardware to all, versions 2.14 and 2.15 showed up. Thanks for letting me know it was there!

I logged into Line 6 Monkey with my Variax Standard, and it indicated that I had Workbench HD 2.13 and needed to update to 2.15. However, when I went to the download section, 2.13 was the most recent version available. What gives?

Now, I'm really confused. This morning, I got my battery and put it in the guitar, and it works!?! Not sure what was going on, but have been unable to get it to work for the last 3 months.

What does your response mean? What do I need to do to fix? Thanks!

I try to charge my battery with the charger included with my Variax, but no light comes on (on the charger). I tested the charger with a multitester, and it appears to have voltage at the contacts. The battery also appears to have full voltage when testing with a multitester, but when I put it in the guitar, the lights flash, then it dies. If I get a light when I press the test button, it's only one and it goes out immediately. I'm considering getting the cable power kit, but if it's just the charger, I'd rather get that. Up until this issue, the battery had been charging properly and working in the guitar. I only discovered this after I had not used the guitar or battery for over 6 months. Our local VFW has jam sessions half the year, and that's the only time I use the modeling in my Variax Standard. Thanks in advance for any help!

You might also want to check out a Line 6 Stage Source L2t, which works better with the acoustic models, and works great with the electric models.

Thanks. Didn't expect definitive, just best possible result.

I typed 1.9 in the Search box to find it.

Will there be a problem updating via the dongle when the next firmware update comes out?

Thanks again!

I don't think there'll be a problem out of the box. I thought hooking the guitar to workbench and making any changes triggered the Spank bug.

I was concerned about the Spank problem if I used Workbench to modify certain banks. I know there's a corrected bank I can download and load from another site (vguitar), but if I had to flash back to an earlier firmware and back to 2.0 with the dongle, that was my concern.

Thanks Zap! I'm looking at getting a "Dent & Scratch" JTV-69 from Sweetwater, and they ship it with 2.0, but I'd like to create my own guitars (part of the fun). Didn't want to brick my JTV if I only have the dongle to use. Bob

Still haven't pulled the trigger on a JTV. Concerned about screwing it up in Workbench HD and not having a POD HD500 to revert to prior firmware, then reflash to 2.0. Seems to be a concern here. I like my POD HD300 and don't really want the complications or cost of the 500x. Any input is appreciated! Thanks, Bob

Have any of you having problems tuned your guitar to an alternate tuning BEFORE using the control on the guitar to achieve the change? I read somewhere else on this forum that it was causing issues with the 12-string modelling, as well as alternate tunings. Probably not applicable here, but wanted to note.