Hi
i'm looking to get a case for my Helix control and one Mission pedal. I'm torn between the Pedaltrain Classic 2 and the Gator G-Tour large
What you guys do to make sure the controller and the mission pedal won't move?
I was thinking on removing the rubber feet at the bottom of the control and get longer screws and bolt it to either board
Anyone care to let me know?
I'm set on these two boards
thanks, C
So far is the Pedal Pad upfront
Really like the hinged floor that I can lift and fix/hide anything etc...
Just want to house the Helix permanently with side connectors and go.
I use a Varian so wondering if they can have a Variax connector on the side as well....
Maybe make a mini snake with all cables...or going full wireless and hide an extra Variax battery underneath? Hmmm
CJ
That's exactly what I meant zooey
My show is a one man band type and don't need to get to fancy either
Power, GTR input and stereo out should be more than enough
Any pics or links would be appreciated
thanks,
CJ
Anyone knows on the smallest pre-wired board like the Trailer Trash that you just have to connect 2 cables [power & audio] on the side and that's that?
I'm looking for something like that for the Helix
Does it exist?
Links?
Pictures?
thanks,
CJ
Hey Chuskey
I though I was one of the few that really liked the Dr. Z amp but that sounded GREAT...!
Also the acoustic sound was really convincing and there's where I lack so far with the HD500x and my JTV69
Would it be possible to see those presets anywhere?
Would love to see both but the acoustic is the one I really need HELP
thanks again
Charles
Wow Jandrio.... I knew it this could be done.....!
I will try and see if I can come up with this setting on the workbench HD
I have never used it before but it's a good time to start tweaking and learn this thing
thanks again
regards,
Charles
YEAH YEAH AND MORE YEAH....!
I think it will be just fine, I don't hear any artefacts because I had to go down just -0.2 which is not that much I will try later on today when I can crack my dream rig and take it from there.... Thanks a lot guys TRULY APPRECIATED....!
C
Hi everyone
I have a one man band show and came to this situation last night with a backing track I just got.
The backing track is "Def Leppard - Animal" is tuned to 435hz instead of 440hz. I would like to know if there's a way I can make a preset with my JTV69 and HD500x to 435hz or try to get as close as possible without to actually tune the guitar since it has tremolo and the change in tension takes a while to get back to 440hz.
Thanks a lot for your fast response
regards, Charles
The problem is that the backup track tuning is BETWEEN 440hz and half step down and the only way to play the song is tuning the guitar to 435hz
When I play along at 435hz is spot on in tune.
Running with the Devil is half step down.... I can easily move the tuning wheel on my JTV69 half step and I'm there. The other song that is in between tuning is Footloose.
This is driving me crazy because I love this song and where I'm performing they are a BIG Def Leppard fans so I have to play it I can tune it to 435z but the problem is that because the JTV69 have a tremolo and when the tension changes it's hard to put it back to 440hz and keep it there
Anyone from line 6 that can help with this? thanks, Charles
I know that...
What I want is to save the tuning preset with my Variax so I can recall it anytime I need to. I'm guessing using the HD500x Edit software?
C