
Recording on FL Studio
By
Matrix_87, in AMPLIFi TT/FX100
Recommended Posts
Triryche 2,594
Have you flashed the FX100 to the current firmware?
Have you installed the USB Audio driver?
silverhead 8,528
Use the Line 6 ASIO usb driver. Do not use ASIO4ALL.
Ops, problem solved.
I just had to download Line 6 ASIO usb driver :P
Really thank you!
But now I have another question.
I have played a bit with the recording and when I play normally, I can hear my sound as I set it (I use headphones), but then as soon as I press Rec the sound seems weird, like double, and more metallic. Do you have any explanation for this_?
Triryche 2,594
I don't use FL Studio,
But it sounds like you may have "Monitoring" (may be called something else) turned on.
Or a plug-in effect.
Or both.
adagosto 11
That's exactly what came to mind as I was reading your post. Triryche may have got it. The monitoring could be on. If you monitor through the same speaker of headphones that you are playing through and there is even a tine bit of latency, you will get that weird sound.
If this is NOT the cause of the weird sounds you're hearing, try reducing the output volume of your speakers when you're recording. See if that changes anything.
Just curious, should have asked this before...when you hear the weird sound, does that weird sound actually get recorded? How do the recordings sound?
The recording sounds exactly how I hear it while recording, which is different compared to the sound out of FL studio.
Actually it's not only while recording, the sounds changes as soon as I assign the guitar to one of the channels of the mixer in FL studio.
Triryche 2,594
The recording sounds exactly how I hear it while recording, which is different compared to the sound out of FL studio.
Not sure I follow that statement.
What do you mean by "different compared to the sound out of FL studio"?
I mean...
if I play without any program, just connecting my headphones to the Amplifi, all good.
If I open FL Studio (just open), still good.
In the exact moment when I put my guitar on one of the mixer channels in FL studio, than it becomes a bit more metallic and weird.
The same obviously during the recording, and it is also recorded like this.
Triryche 2,594
I am not familiar with the FL Studio interface.
Are you selecting somewhere in the software the FX100 ASIO as your device?
Sorry for sounding dense, but can you explain how you put your guitar to one of the mixer channels?
First I select the Line 6 Asio for Amplifi in the audio interface.
Then I openthe mixer panel and clicking on each channel you can assign what you want to put on that channel. In my case I can choose between Amplifi stereo R/L, Amplifi Left, or Amplifi Right. I'm not sure what these options mean, because whatever I select nothing changes in term of sound. But anyway, when I select one of these, then FL studio feels my guitar when I play and I can also start recording.
But at the same time, when I select one of these option (it doesn't matter which), the sound get weird.
Triryche 2,594
I'm wondering if you have an overall effect engaged somewhere in FL, like a plug-in.
The FX100 has two channels, L and R, so those 3 options are allowing you to select L, R, or L/R (both).
Selecting L/R will give you the stereo signal of the FX100.
Did you try searching or posting in the FL Studio forums too?
Hi guys, I need some help.
I've just bought the Amplifi Fx100 and I'm trying to record some guitar track on FL studio connecting the pedal board to my computer by USB, but...
...it doesn't work! The computer doesn't see the guitar at all.
I anticipate I'm not an expert user of FL Studio (I've just started using it), so it maybe a problem of audio configurations or something like this.
I have Asio4All and I have updated my Amplifi firmware.
Thank you in advance!
Share this post
Link to post
Share on other sites