fukuri Posted January 6, 2016 Share Posted January 6, 2016 Another lockup tonight I was doing some hands free editing of the mix parameter of the simple delay and it just froze on me I raised a ticket about this before but you just autoclosed it with the usual upgrade the firmware message Well I've gone from .2 to .3 What now? Quote Link to comment Share on other sites More sharing options...
silverhead Posted January 6, 2016 Share Posted January 6, 2016 This is a long shot, but very fresh in my experience so I'll give it a shot...... Do you by any chance have an external expression pedal connected? If so make sure it is fully inserted. I was having lockup issues earlier today and after much hair pulling discovered that my expression pedal cord was not fully inserted. The tip contact was engaged but the sleeve was not. Lockup issues disappeared as soon as I fully inserted the cord. Quote Link to comment Share on other sites More sharing options...
fukuri Posted January 6, 2016 Author Share Posted January 6, 2016 I have one but as luck would have it it was disconnected when this happened I don't really want to think about this happening onstage Quote Link to comment Share on other sites More sharing options...
diggerbarnz Posted January 6, 2016 Share Posted January 6, 2016 I filed ticket for this bug a couple weeks back...only diff was I was using onboard expression to adjust levels & it was on one of Glens patches - it was new to them Quote Link to comment Share on other sites More sharing options...
fukuri Posted January 6, 2016 Author Share Posted January 6, 2016 I filed ticket for this bug a couple weeks back...only diff was I was using onboard expression to adjust levels & it was on one of Glens patches - it was new to them That is exactly what I was doing Changing the mix level with the onboard EXP Quote Link to comment Share on other sites More sharing options...
fukuri Posted January 6, 2016 Author Share Posted January 6, 2016 A good result for me that it is a known issue when doing a certain thing. Then I can avoid it. My worst worry is it happens at random. Quote Link to comment Share on other sites More sharing options...
diggerbarnz Posted January 6, 2016 Share Posted January 6, 2016 I found if you use buttons instead of exp is a workaround Quote Link to comment Share on other sites More sharing options...
fukuri Posted January 6, 2016 Author Share Posted January 6, 2016 Thanks I'll try and replicate it tonight It's not a feature I'll use often I was just trying it out. Hopefully its consistent and reproducible (which usually means fixable) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.