paulisher Posted February 3, 2016 Share Posted February 3, 2016 Can you use the expression pedal to blend from one amp model to another? Relatively clean to a higher gain. It's been a while but I did it with my hd500. Quote Link to comment Share on other sites More sharing options...
pointfighter Posted February 3, 2016 Share Posted February 3, 2016 Yes you can. If you'll have a look at the setlist containing all the templates there is one doing directly that. Don't know right now the name of that template. Quote Link to comment Share on other sites More sharing options...
Digital_Igloo Posted February 3, 2016 Share Posted February 3, 2016 8 TEMPLATES > 02D TwoTones Blend. Includes spillover delay and reverb as well. Quote Link to comment Share on other sites More sharing options...
paulisher Posted February 4, 2016 Author Share Posted February 4, 2016 Thank you! Quote Link to comment Share on other sites More sharing options...
vxjoe Posted February 4, 2016 Share Posted February 4, 2016 http://line6.com/customtone/tone/1759978/ I used the template to build this Jimmy Herring patch. Enjoy! Quote Link to comment Share on other sites More sharing options...
paulisher Posted February 4, 2016 Author Share Posted February 4, 2016 I tried this, did I do something wrong? I want the expression pedal to blend between two amp models not use a footswitch. As I remember, pan one amp 100% right and the other 100% left and use the expression pedal to pan between the two amp models. Just can't figure it out. Quote Link to comment Share on other sites More sharing options...
tagmusenmagnus1 Posted February 4, 2016 Share Posted February 4, 2016 ​If you want to pan them, you can do it in the Merge-block. But unless you want seperate control over the amps on the mixing board, I see no reason to pan them. Quote Link to comment Share on other sites More sharing options...
Digital_Igloo Posted February 4, 2016 Share Posted February 4, 2016 I tried this, did I do something wrong? I want the expression pedal to blend between two amp models not use a footswitch. As I remember, pan one amp 100% right and the other 100% left and use the expression pedal to pan between the two amp models. Just can't figure it out. Three posts above yours. Quote Link to comment Share on other sites More sharing options...
vxjoe Posted February 4, 2016 Share Posted February 4, 2016 So you want one input and two outputs, mono in stereo out? Quote Link to comment Share on other sites More sharing options...
paulisher Posted February 5, 2016 Author Share Posted February 5, 2016 Not sure this could be done stereo out, as I remember this was done with a stereo pan, one amp (expression pedal) toe up 100% and the other amp tow down 100%. The expression pedal blends the two amp models based on the pedal position. Like using the expression pedal to increase or decrease gain but with two different amp flavors. I will try Tagmuse's suggestion and try the merge-block. Thanks all... Quote Link to comment Share on other sites More sharing options...
paulisher Posted February 8, 2016 Author Share Posted February 8, 2016 http://line6.com/cus...e/tone/1759978/I used the template to build this Jimmy Herring patch. Enjoy! I downloaded this patch and my Helix won't recognize it. I use a windows 8 computer and I tried to drag and drop the saved file into my pc Helix interface. It wouldn't import. Did I do something wrong or could this be a pc/mac thing?? Quote Link to comment Share on other sites More sharing options...
HonestOpinion Posted February 8, 2016 Share Posted February 8, 2016 http://line6.com/cus...e/tone/1759978/ I used the template to build this Jimmy Herring patch. Enjoy! I downloaded this patch and my Helix won't recognize it. I use a windows 8 computer and I tried to drag and drop the saved file into my pc Helix interface. It wouldn't import. Did I do something wrong or could this be a pc/mac thing?? You might want to try selecting the patch location you want to import to and then using the "Import" link to import the preset. That would at least eliminate drag & drop as the source of the problem. Be sure NOT to select "Import Setlist" or "Import Bundle" by accident, you just want the "Import" link. Quote Link to comment Share on other sites More sharing options...
paulisher Posted February 9, 2016 Author Share Posted February 9, 2016 Thanks HO I'll try that Quote Link to comment Share on other sites More sharing options...
HonestOpinion Posted February 9, 2016 Share Posted February 9, 2016 I tried this, did I do something wrong? I want the expression pedal to blend between two amp models not use a footswitch. As I remember, pan one amp 100% right and the other 100% left and use the expression pedal to pan between the two amp models. Just can't figure it out. Thanks HO I'll try that Good luck, also make sure you are using the latest version of the Helix App 1.03 (not the firmware, the latest firmware version is 1.06). Quote Link to comment Share on other sites More sharing options...
paulisher Posted February 9, 2016 Author Share Posted February 9, 2016 Thanks again HO I did all that you suggested and it worked. Turns out I was using Helix ap 1.02. Also: http://line6.com/cus...e/tone/1759978/I used the template to build this Jimmy Herring patch. Enjoy! Since I got this to work I love it. Great job VXJOE. I learned a lot from this and I think it's real creative. The studio comp is essential to balance the levels of the two amp models. Nice! Quote Link to comment Share on other sites More sharing options...
HonestOpinion Posted February 9, 2016 Share Posted February 9, 2016 Thanks again HO I did all that you suggested and it worked. Turns out I was using Helix ap 1.02. Also: http://line6.com/cus...e/tone/1759978/ I used the template to build this Jimmy Herring patch. Enjoy! Since I got this to work I love it. Great job VXJOE. I learned a lot from this and I think it's real creative. The studio comp is essential to balance the levels of the two amp models. Nice! Glad to hear it, cheers! Btw, Jimmy Herring is one of my favorite guitarists. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.