Nible Posted September 24, 2017 Share Posted September 24, 2017 I haven't used my Pod HD500 in probably two years or so and I don't remember breaking any plugs inside it but I can't seem to plug my 1/4" adapter into the 'phones' jack. It also looks like something is inside it butI'm not sure if it's supposed to look like this: https://imgur.com/49P1znT. This is the plug I'm trying to use: https://imgur.com/0lBHs4o Anyone have any idea? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
pianoguyy Posted September 24, 2017 Share Posted September 24, 2017 step one - take a picture of the one right beside it Quote Link to comment Share on other sites More sharing options...
pfsmith0 Posted September 25, 2017 Share Posted September 25, 2017 Does the 1/4" plug fit in the Aux jack? If so, then I'd say "yes". There's something broken off inside the Phones jack. Quote Link to comment Share on other sites More sharing options...
cruisinon2 Posted September 25, 2017 Share Posted September 25, 2017 This should be a fairly simple diagnosis. You can either insert the 1/4" plug, or you can't. If not, then there's something in the way... Quote Link to comment Share on other sites More sharing options...
VAX700 Posted September 26, 2017 Share Posted September 26, 2017 Your 1/4" phones jack definitely has "something" lodged in it... clearly visible in the photo. Probably the insides of a 3.5mm mini connector. In cases like this, ultra-fine tweezers or a paperclip are indicated. It's a delicate operation, so go slow, use caution,.. And be sure to disconnect power before you begin. You can expect a complete recovery and regain full use of your Pod. Quote Link to comment Share on other sites More sharing options...
spaceatl Posted September 26, 2017 Share Posted September 26, 2017 That looks like a broken jack IMO...I think replacing it would be a good idea. Quote Link to comment Share on other sites More sharing options...
Nible Posted September 27, 2017 Author Share Posted September 27, 2017 Yea the thing was I wasn't sure it was supposed to look the same as the other ones beside it and whether it was actually a 1/4" or just something that looks similar. Thanks for the help, I'll try and see if I can get it out somehow. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.