Hey_Joe Posted January 23, 2021 Share Posted January 23, 2021 In my opinion it would be a good thing to have the Powercab Level indicator show up in PowerCab Edit. This would be very helpful (at least to me) when dialing in a preset to see the GREEN and YELLOW colored LED and see if and when it clips into RED from my listening distance (computer to amp placement in the room). Another good thing about this would be, to be able to see the difference between the GREEN to YELLOW signal LEDs. I don't know about you, but on the amp, I have trouble discerning the difference between the GREEN and YELLOW LED (BTW - I am not color blind). Is this doable or is it like the reason L6 can't get a read out code for the tuner written for HX Edit? As I recall the old POD EDIT program (not Gearbox) had a tuner in the GUI - it was doable then. I put it on Ideascale https://line6.ideascale.com/a/dtd/Powercab-Signal-LED-Level-indicator-to-show-up-in-PowerCab-Edit/1009166-23508 Quote Link to comment Share on other sites More sharing options...
rd2rk Posted January 23, 2021 Share Posted January 23, 2021 Wrong forum. This is where you go if you're serious about suggestions for changes and improvements: https://line6.ideascale.com/a/index Before posting a new idea, please search to see if it's already been proposed. If 100 people vote on the same idea presented 20 different ways, it looks like only 5 people care about it! Also, post your ideas one at a time. I for one NEVER vote for multple combined suggestions. FWIW - I'd vote for that! Quote Link to comment Share on other sites More sharing options...
Hey_Joe Posted January 24, 2021 Author Share Posted January 24, 2021 I know how Ideascale works. I searched there before posting here. I'm just asking if any of the IT PC forum people here think it is doable from what they know about L6 coding. Many here have opinions based on such knowledge. If the idea gathers any momentum here, I'll post over there. If it would be too much trouble for Line6 and nobody cares here - fug it. That's all. rd2rk - you're a very helpful forum member here, so, glad you would vote for it. Quote Link to comment Share on other sites More sharing options...
PerS Posted January 24, 2021 Share Posted January 24, 2021 Hi I vote for it too. Have the same problem, have the PC+ behind me and don't see the LED at all if tilted with the "PC-tilt legs". I have placed the PC+ on a stand and have tilted just a little bit by lifting the front feet. That's enough to "hide" the LED. So an indicator in PC Edit would be welcome. Actually more important than the tuner in HX Edit as that tunder is right at your feet... Give us a link to your proposal and I vote for it. Quote Link to comment Share on other sites More sharing options...
rwandering Posted January 25, 2021 Share Posted January 25, 2021 I like the idea. I'll vote for it. Quote Link to comment Share on other sites More sharing options...
Hey_Joe Posted January 25, 2021 Author Share Posted January 25, 2021 it's on Ideascale https://line6.ideascale.com/a/dtd/Powercab-Signal-LED-Level-indicator-to-show-up-in-PowerCab-Edit/1009166-23508 Quote Link to comment Share on other sites More sharing options...
rd2rk Posted January 25, 2021 Share Posted January 25, 2021 5 minutes ago, Hey_Joe said: it's on Ideascale https://line6.ideascale.com/a/dtd/Powercab-Signal-LED-Level-indicator-to-show-up-in-PowerCab-Edit/1009166-23508?submitted=1 And I was the first to vote for it! Quote Link to comment Share on other sites More sharing options...
Hey_Joe Posted January 25, 2021 Author Share Posted January 25, 2021 (edited) This is the ACTIVE Ideascale post: https://line6.ideascale.com/a/dtd/Powercab-Signal-LED-Level-indicator-to-show-up-in-PowerCab-Edit/1009166-23508 Edited January 29, 2021 by Hey_Joe Quote Link to comment Share on other sites More sharing options...
rd2rk Posted January 25, 2021 Share Posted January 25, 2021 I reported it as a duplicate, but don't know if that will accomplish anything, and don't see a way to delete. Quote Link to comment Share on other sites More sharing options...
Hey_Joe Posted January 25, 2021 Author Share Posted January 25, 2021 Thanks for trying Quote Link to comment Share on other sites More sharing options...
PerS Posted January 26, 2021 Share Posted January 26, 2021 I have added my vote on the link rd2rk supplied above, so you have two supporters now :-) Line6 place PC under AMPS, both on line6.com products and support so that should be good. Quote Link to comment Share on other sites More sharing options...
rd2rk Posted January 26, 2021 Share Posted January 26, 2021 This is the ACTIVE post: https://line6.ideascale.com/a/dtd/Powercab-Signal-LED-Level-indicator-to-show-up-in-PowerCab-Edit/1009166-23508 With 2 Votes! Quote Link to comment Share on other sites More sharing options...
HonestOpinion Posted March 5, 2021 Share Posted March 5, 2021 On 1/22/2021 at 7:28 PM, Hey_Joe said: In my opinion it would be a good thing to have the Powercab Level indicator show up in PowerCab Edit. This would be very helpful (at least to me) when dialing in a preset to see the GREEN and YELLOW colored LED and see if and when it clips into RED from my listening distance (computer to amp placement in the room). Another good thing about this would be, to be able to see the difference between the GREEN to YELLOW signal LEDs. I don't know about you, but on the amp, I have trouble discerning the difference between the GREEN and YELLOW LED (BTW - I am not color blind). Is this doable or is it like the reason L6 can't get a read out code for the tuner written for HX Edit? As I recall the old POD EDIT program (not Gearbox) had a tuner in the GUI - it was doable then. I put it on Ideascale https://line6.ideascale.com/a/dtd/Powercab-Signal-LED-Level-indicator-to-show-up-in-PowerCab-Edit/1009166-23508 I would actually find it even more helpful for this indicator to show up in HX Edit and best of all would be on the Helix itself although that might chew up some valuable DSP or memory. PowerCab Edit would be helpful though if that is the only place feasible to make it happen. Voted btw! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.