deo33 Posted April 8, 2021 Share Posted April 8, 2021 HX Edit. Can you please update the editor to include buttons 2,3,4,5,8,9,10,11 Thank you 3 Quote Link to comment Share on other sites More sharing options...
cruisinon2 Posted April 8, 2021 Share Posted April 8, 2021 Two things: 1) Asking in here is useless... feature requests have to go in Ideascale if you want anybody "official" to see it. 2) What exactly are you asking for? It's not terribly clear... 1 Quote Link to comment Share on other sites More sharing options...
HonestOpinion Posted April 8, 2021 Share Posted April 8, 2021 The editor already includes the ability to manipulate every one of the switches(not "buttons") you listed. Assume you are referring to the Helix or LT as you did not mention which HX device you are using. Agree with cruisinon2, you need to include much more detail in your request to clarify it and post it in the correct spot - IdeaScale. Is it possible you don't have your version of HX Edit(latest is 3.0.1) matched up to your firmware version? In HX Edit go to 'Help' --> 'About HX Edit' and make sure it is showing a firmware version that matches your HX Edit version. 1 Quote Link to comment Share on other sites More sharing options...
waymda Posted April 10, 2021 Share Posted April 10, 2021 Hi - can you please read the responses to your previous requests 2 Quote Link to comment Share on other sites More sharing options...
HonestOpinion Posted April 10, 2021 Share Posted April 10, 2021 To the OP deo33. I think I understand what feature you are asking for now by looking at your other topic pointed to by waymda. A perfectly reasonable request but one that again, as cruisinon2 stated, definitely belongs in Ideascale. The same applies to your other request for "Seymour Duncan Powerstage" which you also posted twice in two identically named topics("Power Amp") . It is easier for other people on the forum to help you if you open only one topic for a specific issue and keep posting there. And not to be redundant but again, feature requests have a better chance of making it into the firmware if you submit them to Ideascale. Don't know if you are aware of it but as I stated above you have been opening multiple topics on the same issue. In the case of the "Editor Layout" topics, both topics allude to the same issue with only fragmentary information. This causes people trying to assist you to have to be detectives to piece it all together. Much simpler if you keep it all in one place. As you may perhaps already be familiar with, the 'Bypass/Controller Assign' tab in HX Edit provides a helpful place to at least view and edit footswitch assignments. However it does not allow you to activate/bypass the footswitch as your idea proposes. Good luck with your idea, I can see it being useful, particularly with multiple block assignments to the same footswitch. Also, if you are not using them snapshots can accomplish the same thing in many situations and can be easily switched to from the editor. 1 Quote Link to comment Share on other sites More sharing options...
datacommando Posted April 10, 2021 Share Posted April 10, 2021 On 4/8/2021 at 6:56 PM, deo33 said: Thank you Please stop repeatedly posting the same thing and expecting a different answer! Very frustrating - Please fix this ASAP!!! Check the previous replies. Thank you! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.