hluijcx Posted June 14, 2022 Share Posted June 14, 2022 Hi, I play the violin for many years now, acoustic. Recently I bought myself a NS-CR5 electrical violin. And a Line 6 HX Stomp. For what I read on the internet, the Helix-series is great for violinists too. But unlike many guitarplayers, als a violinist I'm not educated in using an effect processor. Are there any violiniste out there with tips to make a good start building a great sound on my violin? What path can/should I follow? Thanks! Quote Link to comment Share on other sites More sharing options...
soundog Posted June 14, 2022 Share Posted June 14, 2022 You need to learn to create great presets tweaked for your violin and amplification. One good/fast way to do that is to buy some presets from someone doing what you do, and then studying how the presets are built so you can use them as a model. Check out this guy. He plays guitar and electric violin, and his presets are top notch. He has a small selection of them exclusively for violin: https://www.alexpricemusician.com/helix 1 Quote Link to comment Share on other sites More sharing options...
hluijcx Posted June 14, 2022 Author Share Posted June 14, 2022 Thanks! I will study on it! Quote Link to comment Share on other sites More sharing options...
theElevators Posted June 14, 2022 Share Posted June 14, 2022 I play violin. Don't know about your electric violin, but for my Fishman pickup on an acoustic, my tricks are: 1. EQ to take off all the highs 2. wah 3. compressor 4. Octave down/harmonizer 5. Fender-type amp 6. Delay The main thing for me has always been the shrillness of sound. Once I tamed it with the EQ, it works like a guitar, same effects work for it... Distortion made my acoustic violin squeal though, so I used it sparingly. 1 Quote Link to comment Share on other sites More sharing options...
Hey_Joe Posted June 14, 2022 Share Posted June 14, 2022 There are some presets on Line6 CustomTone for violin HERE. Some of the presets are for guitar to emulate violin but some are specifically for violin. As a side note you might want to watch some YouTube instructional videos by Jason Sadites here to help you understand the best ways to set up/operate the Helix (Stomp) albeit they are for guitar. Hope this helps you learn how to set up presets for your CR-5. Quote Link to comment Share on other sites More sharing options...
gk001 Posted June 17, 2022 Share Posted June 17, 2022 Have a read of this https://blog.line6.com/2021/07/02/not-guitar-how-tina-guo-lisa-molinaro-make-cellos-and-violas-rock-with-line-6-fx/ There’s a preset to download on that page too that may be f use Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.