Rikkiff Posted April 26, 2023 Share Posted April 26, 2023 Dear PodGo users, Is it possible to change the effect names on the PodGo unit to the trademark names of the effects they were modeled on? Best, Rikki Quote Link to comment Share on other sites More sharing options...
grdGo33 Posted April 26, 2023 Share Posted April 26, 2023 Nope, not possible, you'd likely need to hack its firmware or something. Quote Link to comment Share on other sites More sharing options...
voxman55 Posted April 26, 2023 Share Posted April 26, 2023 Also, real amp and fx names aren't used because of potential IP and copyright issues, so they are described as 'based on'. If L6 allowed facility to change model name it could fall foul of these. Quote Link to comment Share on other sites More sharing options...
Rikkiff Posted April 26, 2023 Author Share Posted April 26, 2023 Thanks guys. Sorry, I should have been more specific. I know why the effects don't have the real names, and I know that a hack is needed. So I want to know if it is possible at all to access the unit via a hack and then change the names :) Quote Link to comment Share on other sites More sharing options...
silverhead Posted April 26, 2023 Share Posted April 26, 2023 afaik that’s not possible outside of the Line 6 development environment. Quote Link to comment Share on other sites More sharing options...
Rikkiff Posted April 26, 2023 Author Share Posted April 26, 2023 Thanks Silverhead. I will give up on this one then :) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.