Voyager4000 Posted April 28, 2023 Share Posted April 28, 2023 My JTV-59 doesn't have any models on board. When I start the Workbench HD there also are no models? In the Line 6Monkey there is no flash, don't show up. Please help Quote Link to comment Share on other sites More sharing options...
psarkissian Posted April 28, 2023 Share Posted April 28, 2023 Something has to be in there, says it's connected to a 59, and the slots are labeled,... Are you using the correct interface device, correctly? Quote Link to comment Share on other sites More sharing options...
Voyager4000 Posted April 28, 2023 Author Share Posted April 28, 2023 Yes I'm using the Variax USB interface. Normaly I saw all the "standard"models. I haven't used the Workbench HD for a long time because it did not work on my iMac, now I am back on pc. Wanted to change the volumes of the strings. As I turn the model knob on the 59 there is no differend between the models anymore. Quote Link to comment Share on other sites More sharing options...
psarkissian Posted April 28, 2023 Share Posted April 28, 2023 Check the Line 6 Downloads page, make certain the versions of Monkey and Workbench HD are current and match up with your Windows OS. Quote Link to comment Share on other sites More sharing options...
Voyager4000 Posted April 28, 2023 Author Share Posted April 28, 2023 I have done that but doesn't fix anything :( Is there anywhere a download for the models so I can bring them back to the 59? Quote Link to comment Share on other sites More sharing options...
psarkissian Posted April 28, 2023 Share Posted April 28, 2023 Two green LED's on the VDI to USB interface device? Fully charged battery in the guitar? 14/" TRS stereo headphone adapter plugged in? Quote Link to comment Share on other sites More sharing options...
Voyager4000 Posted April 28, 2023 Author Share Posted April 28, 2023 Two leds are green, I don't have a battery in the guitar because I use the Line 6 power supply Quote Link to comment Share on other sites More sharing options...
Voyager4000 Posted April 28, 2023 Author Share Posted April 28, 2023 guitar connects via usb, 2 green leds are on and the Workbench HD shows JTV 59 connected. So that works. The only thing I'm missing are the models. All are the same untitled. It really drives my crazy. Quote Link to comment Share on other sites More sharing options...
psarkissian Posted April 28, 2023 Share Posted April 28, 2023 It's okay we will get this sorted out. Disconnect from Monkey and Workbench HD. Plug in to play, go to Acoustic, toggle-1, push Alt Tune knob to bring up the Blue level models. Does it come up as acoustic 12-string guitar? Quote Link to comment Share on other sites More sharing options...
Voyager4000 Posted April 28, 2023 Author Share Posted April 28, 2023 Nope all sounds the same. I have manualy upload a couple of models and that works, but I don't know the exact settings etc... Quote Link to comment Share on other sites More sharing options...
psarkissian Posted April 28, 2023 Share Posted April 28, 2023 All sounds the same,.... Last question,... have you been playing it using both VDI and the 1/4" jack at the same time, to make use of two outputs at the same time? Quote Link to comment Share on other sites More sharing options...
Voyager4000 Posted April 28, 2023 Author Share Posted April 28, 2023 Only the 1/4" jack. I have the feeling all the models are overwritten with empty models. I tried to factory reset the 59 but no luck with that. Quote Link to comment Share on other sites More sharing options...
psarkissian Posted April 28, 2023 Share Posted April 28, 2023 Reset is done by re-Flashing using Monkey. https://line6.com/find/service_center/ At this point contact,... Hanex Waaier 36 VW Leimuiden, 2451 +31172506993 info@hanexservice.nl ToneSilk Servicing: Electronics,Guitars 1 rue des champs Bat G-ZI de la Piaterie Wasquehal, 59290 09 83 75 54 86 contact@tonesilk.com ... they are the authorized service centers in your region. May need to replace the main board. Quote Link to comment Share on other sites More sharing options...
Voyager4000 Posted April 29, 2023 Author Share Posted April 29, 2023 Thanks for the info. I don't think the mainboard should be replaced. It connects correct to the Monkey and the Workbench. I can make my own models and upload to the mainboard. I had hoped somebody in this forum had stored the models that came with the 59 so I could download it to my guitar. Flashing shoud be possible using the Monkey but unfortunately that function is not in the list in my L6 Monkey. Quote Link to comment Share on other sites More sharing options...
silverhead Posted April 29, 2023 Share Posted April 29, 2023 I don’t see this mentioned earlier in the thread. Have you read pg12 of the JTV Pilot’s Guide? Quote Link to comment Share on other sites More sharing options...
Voyager4000 Posted April 29, 2023 Author Share Posted April 29, 2023 I have tried it but no result. If I push the model button, put in the 14" jack and the switch in the middle no red blinking lights show up. Tried it over and over again. Quote Link to comment Share on other sites More sharing options...
Voyager4000 Posted April 30, 2023 Author Share Posted April 30, 2023 Solved I did a rollback on Monkey and a rollback on the firmware. When I started the workbench all the models where back in place, yes. After this I updated the Monkey and firmware to the newest and all works. Quote Link to comment Share on other sites More sharing options...
psarkissian Posted May 1, 2023 Share Posted May 1, 2023 :) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.