3.80 Hiccup?

[boynigel]

I did the update last night and all seemed good until today when i noticed that the behavior of the 6 physical knobs has changed in that when i push down on a given parameter knob to assign a snapshot-specific parameter, say on a delay or whatever, the number value no longer changes to white (w/brackets) signifying that i'm changing the parameter unique to that snapshot.  Hiccup or user error?

 

My quick fix was to do said edits via Edit on my computer, which appears to be unaffected by this issue.  Anyone else experience this yet?

[datacommando]

On 11/26/2024 at 8:57 PM, boynigel said:

Hiccup or user error?

Hi,

 

When weird stuff starts to happen, especially after an update, you should try a factory reset. In fact it’s part of the information included in the Release Notes.

 

Hope this helps/makes sense.

[boynigel]

i did, but forgot to mention that.  maybe i'll try again in a few days.  In the meantime i've everything pretty well dialed in so I won't need to use that feature in the near future.

[boynigel]

Welp, 3 factory resets later and the problem persists.  Hmmm...

[silverhead]

Just checking a detail…. Make sure you push and turn the parameter knob - not just push it.

[Schmalle]

Press the parameter knob and while pushing turn.

Or long press the parameter knob, then change Controller to Snapshot.

To undo: long press the parameter knob, press the Action button, then Clear Controller.

[boynigel]

On 11/28/2024 at 8:15 AM, silverhead said:

Just checking a detail…. Make sure you push and turn the parameter knob - not just push it.

yes, always

[boynigel]

okay then, tried a fourth reset and the problem is gone!   Now let's see if something else rears its ugly head. ;)