Please ensure Javascript is enabled for purposes of website accessibility Jump to content

NAM


fabrice0503
 Share

Recommended Posts

FEATURE REQUEST: NAM A2 Support for Helix LT

 

Dear Line 6 Team,

 

Please consider adding Neural Amp Modeler (NAM / NAM A2) support to the Helix family, especially the Helix LT.

 

The Helix already has powerful DSP, IR loading and a highly flexible signal chain. Adding a dedicated NAM block would give Helix users access to the rapidly growing NAM ecosystem of high-quality amp captures.

 

Even supporting only NAM A2-Lite or Helix-optimized models would be extremely valuable.

 

This could be a major firmware update that would extend the life and capabilities of existing Helix hardware without requiring users to buy additional equipment.

 

Please consider making NAM support a future Helix firmware feature.

 

I would definitely use this feature on my Helix LT.

 

Thank you, Line 6!

 

Best regards,

A Helix LT user

  • Upvote 1
Link to comment
Share on other sites

  • 2 months later...
On 11/13/2026 at 4:08 PM, hmoller said:

If you're not afraid to load custom firmware, on LT and stomp you can already have nam a2 lite

https://github.com/andreidevs/helix-lt-nam


Hi,

 

Well, even if  it does appear that just about every other modelling unit can load and use NAM A2, right from the tiny Pocket Master on upwards, the official advice is not to do it.

 

This is from Frank R, over on BookFace.

 

https://m.facebook.com/groups/line6helixusergroup/permalink/3462267550623560/?

 

 

  • Like 1
Link to comment
Share on other sites

On 11/14/2026 at 1:21 PM, datacommando said:

Well, even if  it does appear that just about every other modelling unit can load and use NAM A2, right from the tiny Pocket Master on upwards, the official advice is not to do it.

 

Of course they have to say just that.

My inofficial advice is to check it out in any case as the improvements are incredible. Gapless amp "channel" switching within one single block. Between up to 128 captured amps. That's just gorgeous. And quite ocviously, some NAM captures sound fantastic (even if it's just the lite versions, there's very little differences between lite and full).

  • Like 1
Link to comment
Share on other sites

I've used the hacked software on my Stomp for more than a week now  and had no issues with it so far. It's great.

 

If I had the LT I'd try it.

 

The hacked firmware does not change the boot loader so you can always go back to the stock firmware. Even if the hacked firmware was totally corrupted and didn't boot up you can hold footswitches 6 + 12 while powering on (update mode) and upload the stock firmware.

 

So I guess the only drawback is that uploading an unofficial firmware to the device can be interpreted by Line 6 as a breach of warranty. So if your device doesn't start anymore during the warranty period and has the hacked firmware on it - that might be an issue. 

 

I guess for Line 6 the main concern with this firmware hack is that could potentially add work for their customer service.

 

Also I think the Line 6 guys are basically hackers, so they probably have a soft spot for stuff like this. I mean what else are modded amps and pedals if not hacks - changes in the device to make it do what you want?

 

Just my two cents.

Link to comment
Share on other sites

On 11/14/2026 at 9:06 PM, Schmalle said:

I guess for Line 6 the main concern with this firmware hack is that could potentially add work for their customer service.

 

Yeah - but also possibly that there's now quite some more pressure for them to improve the Stadium units. So far, there's pretty much just UI changes, Agoura amps and Showcase setting them apart from the OG units. If you don't care about Showcase and are fine with the old UI, I can see pretty little incentives to buy a new unit.

 

On 11/14/2026 at 9:06 PM, Schmalle said:

Also I think the Line 6 guys are basically hackers, so they probably have a soft spot for stuff like this. I mean what else are modded amps and pedals if not hacks - changes in the device to make it do what you want?

 

I would agree on that. I'm sure that pretty much any programmer is at least "fascinated" at what's happening right now (for good or bad).

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...