Leaderboard

I have rebooted the stadium after this happened. I can recreate the issue with my presets as well just by booting it up and then switching between specific presets I have. No sound coming from the unit and matrix mixer shows sound graph (the green leds that would usually show a signal) but they are all at the same half way level with no sound coming out and not input from the guitar. If I reboot, everything comes back and I get normal sound again and normal input readings. I then play for a little bit, and then swtich presets and it happens again over and over again. I am opening a support ticket as well but was wondering if anyone else has had issues with this one? It's a pretty bad bug and makes me nervous about playing this live right now.

Yes. In your Stomp XL preset use separate amp and cab models (not an integrated amp+cab) and place a SEND block between the amp and cab blocks in the signal chain. Connect the SEND output to the amp’s cab input. Connect the main outputs to FOH. Make sure the output and input levels match. You can position any FX blocks before or after the SEND block depending on whether you want them to be heard in your onstage cab or not.

Just received the THON (Thomann) case for my Stadium. I love their cases - have been using one for many years. Built like a tank AND cheaper than the backpack :). It can be operated from inside the lid. It has room in front (where the vents are) and the unit sits suspended by foam sides about 2 cm in the air, so there is plenty of room for heat dissipation underneath. There is also room behind the unit, for the power cable.

NICE. Almost makes me want to get one even though the Gator case I used with my OG Helix works great with the Stadium and has a handle and wheels! But I do have to take it OUT of the case to use it.

ive been trying since the update was released to submit a ticket for THIS VERY ISSUE. you cant.. their site is broke too.

Hey, I just dropped a pack of 5 free Line 6 Helix presets, and wanted to share it here. They’re a mixed bag: a couple of dirtier, aggressive tones, a few atmospheric patches built around delay and reverb, and some in-between textures that ended up sounding way better than they had any right to. And hey… free is a fair price. If you want to check them out, you can find audio previews in the link. Let me know what you think! https://www.noiseharmony.com/post/line-6-helix-free-presets

I spent a lot of time going through the settings the Tone War guy suggested for all the metal amps and got those where they sounded great. I came across this by accident looking for different blocks to try...At the very end of your final chain get a stereo model of the Bass DI (located in the Dist section) put the Bass and Treb at 4-5 and the level to suit, this will give your preset a full rich low end def and sparkle presence no EQ or Comp can do. Try it you will be adding it to your presets asap. I have no idea what it was intended for but man it fixes the punch and feel of the real amp that is missing.