Jump to content

Bikedude

Members
  • Content Count

    40
  • Joined

  • Last visited

Everything posted by Bikedude

  1. Bikedude

    Updating?

    Thanks Nylander88. Reinstalled HX Edit from download page. That enabled my Edit to communicate with server on update tab. Download successful. 2.91. \m/
  2. Bikedude

    Updating?

    I can't seem to update to 2.90. I'm running 2.81 and when I hit the check for updates tab on HX edit, after I put in my PW, I get a not able to connect with server response. I'm on line at the time. Any suggestions? Thanks for any replies.
  3. Bikedude

    Can't Backup!

    Thanks. I installed 2.8.1 into updater, and easily backed up . I then started the 2.8.1 download and it froze at 50%. I powered off Helix, closed then opened updater, then ran update again and it installed without a hitch.
  4. Bikedude

    Can't Backup!

    Thanks, this sounds time consuming. But I'll try.
  5. Bikedude

    Can't Backup!

    I'm trying to Backup 2.7.1 before I install 2.8.1. When I'm in HX Edit and hit the Backup tab, it doesn't complete the b/u, and I get a retry msg. Of Timeout waiting for response (code 8212). I've updated the Updater and have tried a dozen times. Any suggestions? Thanks in advance, BTW running Windows 7.
  6. I have a 72 Goldtop Deluxe, and I couldn't leave mine alone either. Put in HB's Grover tuners. Didn't even keep the mini's. Like you said, it's too heavy for 4 sets now days, and my Suhr Strat, RW Tele get the most play thru the Helix. I have a first gen Variax I'm going to try, as I just got the cable today.
  7. Thanks for the answers friends. I've had my Flextone and the Flrbrd.on consignment at a music store for 6 mo this now. Not much interest. It was always a good sounding and pretty easy to use setup, but new stuff rules I guess in the modeling world.
  8. Will my old Long Floorboard used with my FlextoneII/Plus work with a Spider V? I haven't read the whole forum yet. Thanks for any replies.
  9. Some of that James Brown Funk was played on Gibson guitars with humbuckers.
  10. Got my G10 yesterday, charged it to a full charge, hooked it up, and so far so good. I took my G90 out of my rack, and replaced it with my Furhman power source. The G10 will get the stage test next week with 2 weeks of 5 niters. I don't roam too far, and if I don't get interference the G90 will go for sale.
  11. Tech21 RK5 in my gig bag to back up my KPA,and Helix, but I've never had to use it. And spare strings, extra guitar, and enough cables, and batteries for the wireless stuff.
  12. Some of the factory profiles are pretty good. I used a tweeked Deluxe Reverb patch for a year, before I bought the Michael Britt profiles. The MBritt is what makes the sounds of the KPA "tough" to beat, AFAIC.
  13. I still have my KPA Rack and KR, as those tones are pretty thought to beat, and I haven't got there with my Helix yet. I hope I can get close, because like you said basically, less stuff to haul! Btw, I have 3 booteeks that have been dust collectors for 2 years si cel I got my KPA.
  14. I would leave the AC30 at home, and go direct to FOH with the Essex30 of the Helix. Use a monitor, or some kind of FRFR for your own mix. That's the beauty of the new generation modelers, you don't need to take an amp.
  15. Bikedude

    Stereo

    Do I need 2 paths to run stereo to FOH? I'll use line level XLR's to my snake, then to 2 channels on the board. If I. drop a stereo chorus or delay in a single path, will they play FOH in stereo?
  16. So did you guys use Glenn's patches live, or did you just use them as templates to create your own patches? I'm interested in his patches also, and would like to just tweek them a bit and use them like they are.
  17. I currently have been using the G90 for a couple of years. Zero issues, except batteries. I don't stray too far from my mic onstage, and the only other wireless would be the Shure IEM's. Could the Shure interfere with the G10? I'm thinking not. My only reason for the G10 would be simplifying my rig. Wouldn't have to bring the rack with KPA/G90.
  18. Yes, and I'm sick of going thru batteries. Between my G90 belt pack, and Shure IEM (9volts), I'm spending a small fortune. I'm sick of 2 belt packs on my strap. I've had the 'guitar bug' but that is old technology, and would cut in an out during a set. Between the 16 Led Par Cans with wireless control, the IEM's and other various stage interference I need something reliable, and the G90 delivers. I just hope the G10 is as foolproof.
  19. I have one back ordered to replace my rack G90 wireless, going minimal. Anyone have one out in the field yet? Andy from L6 had one he was using to demo the Helix, and it looked, and performed so nice, I ordered the thing.
  20. I don't get most of this thread. I just got my Helix last week. I've updated to 1.06 got 3 new amps, bug fixes, stability problems fixed. etc. I've been using a Kemper for 2 years, and although it sounds great, in 10 minutes, I created a clean patch on my Helix as good as any profile I have on the Kemper. I've always disliked screwing around with the USB stick on the KPA whenever I had to do anything. What I like about the Helix is it's fun to navigate the best UI on the market, and the sounds are IMO great. It can only get better.
  21. Me too, better today after I updated to 1.06, and apply the Hi Cut in the cab block. The Matchless amps sound pretty dam good.
  22. Bikedude

    Setlists

    Sometimes I'm so stoopid! The obvious escapes me on more than one occasion.
  23. Bikedude

    Setlists

    Thanks, I'll try again. On my first go, I couldn't seem to get the arrow to move with the joystick. I tried to move the arrow down the Setlists to no avail.
×
×
  • Create New...