PDKTDK

This weekend I was playing with HD500x hooked up via L6 using class a/b III setting in the standard prescribed way (pre-amp from HD/full power). Was running the amp at just over 12:00 and the DT master at about 11:00. About 3 hours in the amp appeared to lose all evidence of power (lights, sound, etc) although power button was engaged on. I restarted and everything was well. I typically put amp in standby and turn master down to zero during breaks. Just seeking feedback as there does not appear to be threads with this same issue. Just when I was starting to get secure using this twice line6 repaired amp. UGH

Mine has been to line6 twice and they covered it. I actually bought a backup one (both DT50) after the first incident. I've recently started gigging again and am scared to death it will fail me. Keep in mind these amp have not had even 20 hours of use. I wish they'd take them back and give me a solid state speaker replacement with L6 link. They're both like new... because I am afraid to use them.

If the looper were in fact stereo it would be a non-issue as to how/what I'm inputting is panned, but being stereo would obviously require more dsp and memory/storage. If the looper block were movable within chains versus pre and post there would be options with the mixer or inserting pan blocks... If there simply existed a pan option (which is feasible with little to no overhead) that would've been great... So, I get it and thank you. Sadly, the HD500 is beyond future development I fear along with my two (frequently in repair) DT50's... The Helix has certainly shown us that the Dream Rig and L6 Link tech are pretty much abandoned. The answer to the question in any perceived configuration with the HD500 is a resounding: No.

...and there is no way to pan it I presume?

Hey Phil, I can't comprehend how this could possibly work. The loop block will only work before or after the signal chains and not within either. Putting a pan block before (when it is on the end) or after (when it is at the beginning) does the obvious which is kills one side of input. The looper block whether on the front or the back is getting proper stereo as proven by my output. I don't think the looper is stereo... and apparently you deleted your comment so... I do appreciate your effort.

I've created a preset with an electric and acoustic guitar utilizing the aux in for the acoustic.. I set up two paths left for electric and right for acoustic running both XLR's to FOH... and it works fantastic! That is, until I run the looper. It comes out both channels and no apparent options to pan it. Any hope here? Thanks! Edit/Update: No. Not at all. Never.

Thanks peeps! I can't wait for shipping. GC has it in stock for $28 USD. Much appreciation for this always supportive community.

I played it today at my gig as I normally do. Came home and plugged it in and the screen lit up for a second and went dead. I tried different outlets. It did the same thing one more time. Now it appears to just be dead I did notice the green light is not illuminating on the power supply. Does the power supply only light up when connected to a working HD500 or is it always lit when plugged into power? This would make the solution obvious... as well as less costly. Thanks.

If I'm running a mono chain to FOH, using just left XLR should be fine right? I confirmed in my Bose LI Model II mixer that they channels are identical. I don't think they would have to overpush their board/ampliofication to get acceptable levels. There was no sound quality difference.

My transformer blew in early March. I took it in. Then got the tech 059 bulletin email and that was done while it was there. Got it back about 2 weeks ago. In class A pentode mode there is a rattling sound coming from the speaker when I resonate notes. Took it back. Hopefully will get it back in 3 months or so. I bought a 2nd DT50 at the time it blew. So... I will wait and see. Good news is the amp was 2 months out of warranty and Line6 honored all repairs.

Worked for me.

+1 in December 11 I went to GC to get an amp. They plugged me into a Line 6 amp. Solid State. Lots of effects built-in. I played and was like... Okay. I told they guy that I would take it. I like convenience and I am a techie. I said to him to plug me into the DT50 before we wrap the amp up. Immediately my playing got inspired. Now the DT had no effects. So blindly I settled on the HD500. I get home and realize that these two units were made for each other. I love the HD500. If you haven't heard it L6 linked into a DT do yourself a favor. Try it. With regards to this discussion: I've read too many times where in blind tests vintage gear freaks actually picked the modeled amp as the authentic one. The bottom line: If it sounds good - It is good. :D

This was a tune Gilmour did not use a Strat on. You can hear what it sounds like here: http://soundcloud.com/pd-k-1/run-like-hell-pink-floyd-cover Rock on!

Another + to this is the mobile interface to this forum is much better. :-)

I never was one to record covers. Ever. Lately I have tackled some to improve my recording technique and to learn how people do things. I did this last week Once again: THE TELE! http://soundcloud.com/pd-k-1/come-together-beatles-cover Notice the guitar at the end in the right speaker. I used a vintage amp with vibrato to emulate a Rhodes effect.

Actually - the first couple Zeppelin albums were Teles. The solo to Stairway is a Tele as well. :D and Muchos Gracias on the compliment.

That's a hot looking guitar!

http://soundcloud.com/pd-k-1/the-immigrant-song-led Here's the Tele in action!

Yeah BUDDY! I've been playing the hell out of it!

It depends what I am playing. Maple is smooth as far as playability and gets some bright tones. I do like the warmth of Rosewood as well though. The Black EVH sounds sweet. I record and play a lot of music. Between these 3 guitars (and I have a few more as well - Taylor Acoustic and Takamine 12 string among others) I have most bases covered.

This patch seems to have gotten good reviews. http://line6.com/customtone/tone/208096/ If it's a different HD version download HD Edit for that unit and open the patch. You can cop the settings from there. It was done with A 61 Strat. Hope this helps. Good Luck!

Yeah, they are awesome instruments. I'll tell you what though.... That Tele sounds sweet. With the custom shop pickup I can nail some great Strat tones.

Here's my new 2012 American Standard Telecaster: and MY EVH Wofgang Specials: :D

That is an an attenuator/direct box. It's kind of redundant as you have an XLR direct output on the back of the amp itself. It apparently goes for the same price as the Airbrake (that I use AND LOVE). Many of us use the Airbrake. For it's price point it's excellent quality. Dr. Z has a good reputation. There is a review here of the Jettenuator: http://www.thegearpage.net/board/showthread.php?t=1228696 He speaks highly of the unit. His main concern being that the 1st/lowest attenuating setting takes off too much volume making it not useful in his band setting. He also uses a 50 watt amp. Anyway... I hope this helps. PDK

I believe that's illegal everywhere except Utah.