MacShock
-
Posts
28 -
Joined
-
Last visited
Recent Profile Visitors
1,287 profile views
MacShock's Achievements
-
Hi everybody, I have a Helix and since a couple of days also the Native version. But I can not get the sounds on Native that I get from the Floorversion. It sounds thin and fizzy, especially the distorted patches. Doesn't feel ok at all. I am certainly doing something wrong. I guess it has something to do with the input levels but I think I did everything right. I adjusted the audio interface to max but avoid clipping and the levels on Native are set to normal. On the Mac I can not change volume. It is disables because of the audio interface.Weird. Any idea? I can't believe that Native sounds so bad.
-
Hi, I have a preset with snapshots using 1 amp (the cartographer which is great). Obviously because of using snapshots I have different parameters on the amp per snapshots. When I switch from one snapshot to another there is a loud pop noise. Is there a way to avoid that noise. I tried to use an eq pedal to regulate volume and keep the volume on the amp channel equal but this did not solve the issue. I also tried to put the amp in another path but this did not help neither.
-
Cool. Thank you. I will try this out.
-
Hi, I've read in this forum that it is possible to connect the iPhone to the Helix via camera adapter using the USB in in the back of the helix in order to stream audio. So, here I am. Everything connected but the music comes out of the loudspeaker of the iPhone and not my headphone (connected to the Helix). What do I have do? Thanks for your input and help. Markus
-
tks everybody for your help!!
-
Thks for the replies
-
Hi, I tried to connect my helix via xlr direct into the m20d (also tried into L3t and from L3t out into the m20d). There was quite a bit of clipping going on even though the meter was not showing any clipping. I wanted to to trim (using the auto trim option in m20d) but the mixer could not adjust saying "signal too hot". It is a bit weird since I did not have the impression I played very loud. In the helix I did just update to firmware 2.2 and all global settings are on "default". The xlr out is set to line level. The big volume know was set to the middle position. Very strange. Anybody has experience with that? Tks Markus
-
Hi, I tried to connect my helix via xlr direct into the m20d (also tried into L3t and from L3t out into the m20d). There was quite a bit of clipping going on even though the meter was not showing any clipping. I wanted to to trim (using the auto trim option in m20d) but the mixer could not adjust saying "signal too hot". It is a bit weird since I did not have the impression I played very loud. In the helix I did just update to firmware 2.2 and all global settings are on "default". The xlr out is set to line level. The big volume know was set to the middle position. Very strange. Anybody has experience with that? Tks Markus
-
Hi, thank you everybody for your support. I did reset globals (FS 5&6) and everything is ok now. Tks Markus
-
I did check this morning, global setting is snap/stomp, but it doesn't really matter. When I turn the knob to scroll through all different modes nothing chances on the board. Still have just the stomp boxes in the upper row and nothing in the lower. Shall I reset? Is there a way to reset?
-
Hi, this is weird. I am at home playing helix via computer. Suddenly my snapshots disappeared. They are still on the software, helix edit. But the label on the foot switches where normally you have the, stomp boxes or the snapshots are all empty. In the upper row I can see the stomp boxes but in the lower row where normally I have the 4 snapshots they are all empty. I shut down and restarted but all the same. Somebody experienced the same? Markus
-
Thks, any footswitch or a specific one?
-
Hi, I am interested in the media player feature of the m20d. In the manual it is written that there is a footswitch that allows to toggle between stop/start of the playlist. I can not find this foot switch. Does anybody has experience with that. I also have a Helix. Would it be perhaps possible to asign a foot switch of the helix to do that? Tks Markus
-
Hi Guitarmaniac64, thank you for your input. Yes, that is the pedal, a dvp4 from dunlop. It works now perfectly fine. I use a normal 1/4 inch from pedal output to exp3 of helix. I also need to plug an empty jack to the input (without that it does not work properly). This way it works as volume or expression.
