nib2000
Members-
Posts
11 -
Joined
-
Last visited
Everything posted by nib2000
-
That sounds like a grounding issue somewhere honestly. What is you go Helix>Power Amp? Next step is to plugin JMP in 4cm like you would normally do, but disable Loop in a patch. If the setup is still quiet, enable loop. If its noisy at this point, it's gotta be one of the loop cables
-
thanks guys, good point on the room mic
-
any ideas anyone? to clarify, not talking about the review (haven't seen it even), just first 7 seconds of PremierGuitar intro riff
-
Nah, I was just talking about PremierGuitar "theme" intro, first 7 seconds
-
Hey guys, I am struggling with setting up a nice, punchy (but not brittle), convincing Marshall crunch on Helix. For the lack of a better example, below (the intro) is what I consider to be closest to my personal holy grail crunch tone as far as Marshalls go. Any tips on how to get there? Thanks!
-
Nice tip on Optical Trem, it does thicken up the sound a bit
-
Thanks everyone for chiming in. I actually ended up getting a full Helix instead, and pedal just works fine as expected there. Must have been something with my particular unit
-
Reinstalled 2.21 firmware, did factory reset, the same thing. I happened to have a line 6 expression pedal for hd500x laying around, and the issue doesn't happen when I assign my volume blocks to that! Not sure if its a bug or I just got a dud, but I guess its gonna have to go back(
-
yep, I did that, everything as per instructions. Appreciate the replies Phil. The only thing I haven't tried yet is a factory reset.
-
Yeah, I went though all my sounds and made sure it's EXP2 across the board for a volume block. I am literally watching volume block settings when switching - I could be on 15%, switch to another preset and be on 45% without even touching the pedal. Maybe I need to do a factory rest and see what happens
-
Hey guys, New Helix LT owner here (still withing return period), been hd500x user for years. Here is my problem. This is how I used to operate Hd500x: I would setup my presets (doesn't matter what's inside really), balance the levels to my liking, and then add a volume block at the end of each preset tied to expression pedal. This way I had sort of a master volume on my HD no matter which preset I am in. I knew that if I need to dial myself down, I will still be in balance volume-wise once I jump to another preset. Now with Helix, It seems to totally ignore the fact that I have set EXP1 and EXP2 position set to be Global, and when I switch between presets, it sets volume block pedal position to whatever it was when I saved it. IT DOESN'T apply the actual position of the pedal upon switching between presets. What do I do here? I MUST be able to control my overall unit level, and it just worked on HD500x. FYI, before I created any sounds on it, I went ahead and upgraded to 2.21 software, so all my patches are "native" 2.21. Am I missing something here? LOVE the unit, but this is becoming a showstopper. Giant volume jumps when going from preset to preset, not usable. Any help and tips would be greatly appreciated. Thanks!