Jump to content

rbum

Members
  • Content Count

    41
  • Joined

  • Last visited

Community Reputation

1 Neutral

About rbum

  • Rank
    Just Startin'

Contact Methods

  • Website URL
    http://www.goodnight-johnboy.de

Profile Information

  • Gender
    Not Telling
  • Registered Products
    7

Recent Profile Visitors

487 profile views
  1. THX for this idea and link. Quite amazing how it works. Although it's not the solution for my "problem" , because it is the sound of the reverb in a huge room / cave or whatever. With clear sounds this might be usable and gives an interesting background sound. With distortion sounds there is a big difference between the original sound of the stroke and the reverbed sound, which becomes more a noise than a sound. Play a power cord with distortion sound on a guitar with very good sustain and hold it - that is what I need, but lasting longer. EXH freeze delivers more the long reverb of the cord when you don't hold the sustain on the guitar.
  2. I often use Helix with guitars that have mag pickups and piezo systems as well. I usually have one path for the electric sound and one for the acoustic sound, which works great. I can switch from clear rhythm or picking in the verse to fat rock sound in the chorus or to solo sounds- whatever. In the chorus of some songs it would sound good, to mix both sounds, to get a fat distorted "background" with the nice rhythm strokes of the acoustic over it. Like you have it with TWO PLAYERS in most power ballads. Being the only guitar player in the band, it works as long as the song can take a distortion rhythm sound in the chorus along with the acoustic strokes - that means: in up-tempo songs. What I could not achieve, is a fat electric sound of a power chord that is lasting and then play acoustic rhythm sounds over it. As one uses usually more than one cord in a song, it must be possible to end the lasting sound while changing to the next chord - which should be lasting again. Just imagine two players perform it, then the idea get's clear, I hope. I tried things like a looong reverb, with no pre-delay and near to 100% mix in path A, and acoustic rhythm sounds in path B but the sound I get out of A is a reverbed sound and not a lasting original sound. I just want to play that chord, stop playing on guitar, but the sound should last in Helix until I stop it by lowering the volume or changing the snapshot, the mix or whatever. With that sound available, I could then play over it with acoustic sound. Anyone have an idea, trick or effect in Helix, which might help here?
  3. rbum

    Very good idea, but ....

    Yes, right, in case when cab/IR is the last block before "out" that would make sense. At the moment "cab" is in the middle of my chain in most presets: comp + modulation + distortion + amp + cab/IR + modulation stereo + volume + delay stereo + reverb stereo. I would think moving the cab/IR to the end of this chain would kill the stereo effects for the FOH/PA? comp + modulation + distortion + amp + modulation stereo + volume + delay stereo + reverb stereo + FX send + cab/IR. At least for mono chains, if there is a free block available, it could be a simple solution for this problem.
  4. rbum

    Very good idea, but ....

    Sorry to confuse you... it's not easy to write about these experiences in another language... But you did get it right: "If you have the PC in Flat mode in the FRFR voicing, the signal coming out of the XLR out should basically match the signal coming into it. There should be no speaker modeling applied to it." It SHOULD, but I found no way to get out of the PC XLR with NO modeling. And so did others. It's because the signal is splitted going INTO the PC: The signal goes A: to the speaker of the PC ( FRFR or any other preset) and B: to the XLR of the PC. And at this point there is no way to choose NO cab or No mic in the presets. You can choose a different cab for the PC speaker and the XLR out - which is interesting, but could lead to a different sound on stage and in the audience... I started presets from scratch and at the end of the chain to XLR you have to decide which cab you choose - no way to get out flat. This - and some other decisions line6 made on the PC - confused me too...
  5. rbum

    Very good idea, but ....

    Yes, you are right in both aspects: if you run the Helix out XLR to a mixer to powered speaker, you would usually use the preset cabs or some impulse responses - at least for distorted sounds. You could use these setup and feed it into the PC in FRFR mode (for exmple with the line6 link) but then you loose the idea of the PC, to give the sound a more "amp in the room" feeling, it seems one loses some kind of direct response and dynamic compared to using only the amps of the Helix and then use the cabs of the PC. For me FRFR was not the best sound to use the PC. In your setup you use the PC INSTEAD of the mixer + powered speaker. So you could bypass the Helix cabs and take the advatages of the cab sounds of the PC. But if you have like 20 songs with different configuration, you would have to bypass the caps in every song and path before starting to play .... And beforehand you should use the seperated amp + cab in Helix (and not the amp-cab combination presets). Depending on how often you change between your setups and how many presets you use, this could be very annoying. Sure, you could create two different setlist cab OFF and Cab ON- but every changed parameter in one setlist's preset would need to be done in the other setlist as well. In my setup I cannot bypass the Helix cabs, because my Helix XLR still goes out to the PA, the PC is only my stage monitoring. Bypassing the cabs would kill the sound for the main stage ... So I would have to make different paths in Helix, one for the PA (with Helix cabs ON) one for the monitor PC (with Helix Cabs OFF) - that is not working because I would run out of paths and processor power in many songs.
  6. Well I have both L3m and L2m and tested it 3 weeks in comparison with a power cab plus... If you just look at the E-Guitar sound, the power cab does pretty well in delivering a guitar amps sound (depending which preset and other possibilities you choose). Here the preset of the stagescource is not comparable for me (never used it). For acoustic sound it's completely different. The high frequencies sound to "hard" for me and there is a lack of bottom or volume (I don't know the exact term in english ..) it just sounds not natural or dynamic. My complete impression about the power cab plus you find here:
  7. rbum

    Helix to run bluetooth Headphones

    To my knowledge REAL wireless in ear monitor system don't exist at this time. Regardless the price, they all still have a wire from the earphones to the body pack. Real wireless bluetooth does exist already: just the earphone which connects to a bluetooth source (Sony, Apple, B&O...) . But none with aptX Low Latency ...
  8. rbum

    Very good idea, but ....

    For a long time I was looking for a speaker or amp that could reproduce both: good E-guitar sounds and authentic acoustic sounds and whose high frequency cone or compression driver could be switched off by midi or even amp switching out of Helix or other modelers. For regardless how I tried to get distorted E-guitar sounds out of the used boxes (and I tried many): as long as the high frequency cone (or whatever the speaker uses) is involved, for me there was something "unreal" in these tones. I have an old Peavy Keyboard amp with a tweeter that could be switched off manually, and "voila": that made the big difference. But the amp was too heavy and switching off the tweeter in the middle of a song or remotely was not possible. So I use stagescource L2 and L3 instead, but I take the 1/4" inputs and reduce the high frequencies with the EQ. As Line6 introduced the power cab plus this seemed to be a really good idea to get the best of both worlds, programmable! When the power cab plus arrived, I was surprised about the size (it looks small for a 12" ) and the weight (nice to handle). What I did not like from the start was the position of the interface (knobs and screen) at the back edge of the top. When pushed backwards in monitor position, you cannot see anything: not the screen nor the color of the knobs ! And if you want to change something you have to move the cab or bend over (with your guitar hanging at your side...) Standing upright on the floor like an amp the sound is directly "at your feet" and you have to step back some meters/ inches to get the real sound impression. When taken up on a stand to guitarlevel for me again the interface is not easy to see or reach. Why not put them in front ? The sound impression is very different, depending what you use: the clean and distorted E-guitar sounds (using amp modeling of Helix and the speaker modeling of power cab) give real good results - for me the best I have heard from FRFR speakers so far. And they deliver a good feeling of response while playing. But it's still the sound of ONE 12" speaker, not 2 x 12" or more, so for a real rock sound in a Band without using a PA it might not be "fat" enough. You can choose different speaker models and they do sound differently with every amp models - just find the ones that transport your personal sound. Using acoustic guitars, such as Ibanez, Ovation or Godin and PRS with piezo outputs, the power cab plus does not sound authentic in my ears. The high frequencies are to hard and there is a lack of bottom or volume, regardless how loud you play. The sound is not comparable to the sound of the stagescource which can deliver real good and dynamic acoustic tones. And there is no real EQ that could make a change. There are possibilities to control the level of high frequencies, but not the frequency or range. So this was disappointing because otherwise it could be a very helpful box for acoustic musicians as well! To change presets via a controller you need to use midi at the moment, which is ok. As midi with Helix can be tricky, it would be much smarter to have a solution via line6 link, which is said to be coming. Obviously at the moment it is not possible to get out the XLR to PA without a speaker simulation (no FRFR) - which ruins the acoustic sounds !!! There are some things more to think about before including the power cab into your setup. If you use the cab simulations of Helix before going into the PA (that would be the normal way, if you don't use mics), you cannot use the speaker modeling of the Power Cab (which sounds best for me) - unless you build different paths for both outputs in your Helix’s presets. If you use stereo sounds, you'll need two Power Cabs to get this stereo signal from the Power Cab to the PA (via XLR or mics). If you want to send acoustic sounds out of the XLR to the PA, this does not work... In my Power Cab Plus the second input - which is said to be permanent FRFR - was a copy of the first one: everything I chose for input one would influence input two. So there was no way to use it as monitor or aux input. This may be a software or cable failure. But even in FRFR position the sound was not neutral in my ears. I fed mp3 songs via XLR from the PA and it sounded "boxed", while on PA (tried Stagescource L3m and L2m) it sounded good. So for me, this really good idea does not work because of the (poor) acoustic sound and some restrictions in the way I would have to use the Power Cab in my rig / live equipment (if I don't buy two units). Some restrictions may be fixed in oncoming updates, but for the moment I returned the quite pricy cab within a 30 days money back policy > thanks to Thomann for this opportunity!
  9. rbum

    Helix to run bluetooth Headphones

    You may try transmitters AND headphones that both use the aptX Low Latency Codec . They say, the latency is below 40ms https://www.aptx.com/aptx-low-latency There is also a database with all products that use aptX Low Latency. But I doubt, that it is reliable enough for using live - let alone the bluetooth connection which should not be interrupted by anything in it's way. That's maybe why you don't see any professional with bluetooth inear (which are available already) until now. Wait a year or two: I'd bet it's going that way.
  10. rbum

    Send a Midi event when changing Snapshot?

    Well , there are different midi messages: I used only cc messages, not pc (program change) messages. It depends on what your receiving machine needs to do what you want ... As far as I know the pc messages are send everytime you change a present (unless you deactivate this option in globals), but can also be send with snapshots. For notes I guess you'll need cc messages with value...
  11. rbum

    Send a Midi event when changing Snapshot?

    Yes it is possible to send different midi messages with every snapshot, but it' s a bit tricky though. Like everything in snapshots it's also in command center with midi: every change in one snapshot will be repeated in the following ones unless you change it again. For midi that means, that a cc message with value 0- 66 will be send (again !) with every following snapshot until you change that value to 67 -127. If you need more multiple cc messages in differnet channels, you have to set the values right in every snapshot you use, which can be complicated. Also sometimes there seems to be a bug and the values change from - for example- 127 to 125 while saving, which can make a difference depending on what you want to achieve. If you set it right, you can - for example - start recording a sequence in an external looper in one snapshot, stop the recording in the next snapshot and start to play the loop in another one, which is pretty cool because the Helix looper is of no use for live music as long as you use snaphots in my opinion. In the past some of the these programmed midi messages got lost / confused by some firmware updates, where there might have been major changes in the midi functions. Didn't manage to "repair" all my settings afterwards because of the time needed to fix it.
  12. rbum

    HELIX to L3T via L6 LINK - TRYING TO GET GOOD LIVE TONES

    Many users looking for a decent sound found a way by using the Gobal EQ to cut off the low and hight frequenzies. You can choose which output the EQ is working on (XLR, 1"4, or both - and it always works on the phones output) But to my knowledge and experience, the global EQ does NOT affect the L6 Link! Which makes it impossible to do something "global" using this Link and the sound will be very harsh (to my ears at least). If you dont' need the additional inputs at the LT3, you can use them and send the signal via one of the normal outputs from Helix to LT3 and try to create "your" sound by using the Global EQ in Helix + the EQ on the LT3. This worked very well for me. Plus you can adjust the sound depending on the location you play or depending if you use the LT3 as your monitor or for the audience sound.
  13. rbum

    Stage Scape Usb Wifi

    When you say "my router" do I understand right, you mean not airport express but another "normal" router? I tried he Belkin with a german "Fritzbox" but it won't connect to M20d. Is there something in the konfiguration of the router that is nessecary for this function? I will use it only to get the iPad connected to M20d.
  14. rbum

    Metronome for Helix (Patch included)

    That seems to be a good idea! But when I import the renamed file (metromone.hlx) it appears with the name "Paul Strat" and has a clean sound and several effectblocks, but nothing to do with a metronome... very strange! Any idea what went wrong ? Regards, Ralph
  15. rbum

    Helix direct into m20d mixer

    Make sure, you have switched of +48 power in the input row where you plugged in the xlr from Helix. Does not work together properly. ..
×