flop54

WWoooooowwww... Line 6 progammers, You are really good guys and so modest. You didn't notify the lfo reset but you solved it! Now it works for me. I test it with midi sync, and a second midi controler, it seems to be ok! And the others midi implementation are so useful. I think that an automatic phase reset in each snapshot change would be great too. A big thank for this update!

Thank you fpr this update but what about the lfo's reset? I didn't read anything about this problem. It's a shame!

Yes I'm a bass player!!! :) Yes you have right it's a good idea! I didn't think about this way! Thanks

Hello when i press the tap tempo one time the tempo is restarted. Are we agree with that ? I try to send a CC64 just one time and it seems it dosen't do the same. Is it normal ? Thanks

hello, Is it normal? I use a midi clock before the Helix. When i engage the clock the helix changes his tempo and my effects after too. When i disengage the clock the helix returns on his snapshot tempo but not the other effect (strymon). Another strange think with midi clock. If the helix is midi thru when you use a midi clock before. The externe midi clock and the helix midi are adding her clock so the tempo on the other effect are doubled. I post this on another subject : We need : - the LFO to start from the beginning of the sweep as soon as I activate the relative snapshot - the LFO to start from the beginning of the sweep as soon as we hit the tap tempo switch (it have to work with CC 64) - The same with a midi clock send on the helix I hope it's could be on the next update because some sounds with LFO are very cool but unuseless like that Thanks

Hello i try to use some rythmic effects and i'm agree with you. The helix have some beautifull preset but some are unuseless because of that. We need : - the LFO to start from the beginning of the sweep as soon as I activate the relative snapshot - the LFO to start from the beginning of the sweep as soon as we hit the tap tempo switch (it have to work with CC 64) - The same with a midi clock send on the helix Thanks

I make a test so if i use the usb connexion (without audio interface) it works but not with my audio interface with midi. Perhaps the problems is my interface...

Hello this is my friend's (sound man) answer : Because distortion almost always takes away some extreme low end. Splitting allows you to keep the consistency of your clean signal and the distortion then adds a layer of texture instead of changing drastically the way your tone fits in the mix.

Hello I use midi CC and PC to change preset and snapshot and I use midi clock to synchronise too. When I only use PC and CC it works. When I only use midi Clock it works. But when i use twice together. The helix executes only three message (for example one PC and 2 CC) after that he seems to ignore it. I have check the midi message (with bome send DX) and all the message are sending. My Soft is reaper. I want to test with another soft. Who can do this test for me? Thanks

Thanks! That's what i thought I will try a mono adaptateur perhaps it work: !

Language barrier -> the story of my life... Sorry and thank you for your patience! No that dosen't solve my problem because it's the same for me to have 2 presets or 2 snapshots.

Yes it is what i do now but because i use many snapshot I use two presets for doing that.

Here is an exemple. If you play you ear the wha on left and the distortion on right and i want to hear the twice on center but i want to have the wha trought the Left XLR out and the distortion trought the right XLR out. This is my configuration : The first out is set on left to send only the bass with out distortion The second out is set on right to send only the distortion But I think that like this configuration i can't use the helix phones out because i hear a stereo signal and I would have a stereo signal. So for me there is three solutions : The first is to have two preset : - one with xlr out used and panned - one with phones out used and centered The second is to use a stuff like this : https://www.thomann.de/fr/millenium_hpa_in_ear.htm. I plug the helix XLR out on this amplifier, my hearphone too and i use the mono option. And the thrice is to ask line6 to add a Global option to switch the phones out on a mono signal. Do you think i have right? Thank you for your help Test 2 Channel.hlx

Hello sorry for checking now. No this is not a solution for me or i didn't understand what you mean. I just want to have à mono mix option to use : - the xlr on stage Left = mono clean singal (path A) and right = mono saturation signal (path B) - the phones at phone with path A and B at center And i think it's not possible doing that without duplicating all my preset with a stage and home configuration. No ?

Whhhhoooooooaaaaahhhh. I just updated my helix floor and i want to say a big thank because the adds are so hudge! Thank you!