Please ensure Javascript is enabled for purposes of website accessibility Jump to content

Mavril

Members
  • Posts

    28
  • Joined

  • Last visited

Profile Information

  • Registered Products
    14

Mavril's Achievements

Apprentice

Apprentice (3/14)

  • Week One Done
  • One Month Later
  • One Year In
  • First Post Rare
  • Collaborator Rare

Recent Badges

5

Reputation

  1. Don't use Monkey, I've had nothing but dramas with it since the last update. See what happens if you go directly to the download section of the support site, select your hardware, select the application and select your OS. see what is there (or not) and then update your ticket. I had a link sent to me by Line 6 for a download that worked after a similar monkey issue for a different OS and FW.
  2. That's the idea CW, but the ethernet cable flexibility is crucial as has been commented. There are only a couple of wholesalers around me and a bunch of online sellers. If anyone has feedback on a brand or model of cable that has proved to be good, I'll hunt it down online and then order the neutrik shells to fit up. Also helps cusotmise length which I do with the rest of my leads.
  3. My guess from the OP is that it is related to the jack connection and switch. considering the XPS does not turn it on there maybe an issue with the continuity of the switch action at the body of the jack connector. This is the same point at which the battery switch is for the internal pack. if you take the batteries out and are able to run the guitar through a pod unit by VDI cable (ethernet) you may be able to check if there is further damage to the guitar as it bypasses this jack connector. I contacted Line 6 about schematic resources for the unit but they were unwilling to supply the info. They directed me to a yamaha support centre on the opposite side of the country (I'm in Australia). Not sure whether Yamaha are handling support in Italy as well.
  4. FYI, I found the fault in the end and it appears to be a little bit common with the old packs. It is an issue with the design of the 6 battery pack lugs contacting the conductive paint in the cavity. By looking at the area it seemed to be very unlikely but a few tests and it proved to be the case. Unsure why the battery compartment needs to be Faraday caged but it doesn't need to be conductive. I will be building the cavity up with a silicone or something that will insulate and hold the pack more securely (currently rattles a little). Also wondering if anyone knows of a good source of flexible, shielded Ethernet cable in Australia? Us based suppliers cost too much in shipping
  5. Ooh and I should ask you CW if you use nickel or phosphor bronze strings? what did the 700 acoustic come with standard?
  6. Thanks for the reply Charile_Watt, I'll follow the switch path and the supply path but it sounds more like a capacitor is not loading the supply rail correctly (which is about right for the age of an electrolytic). As for the blown diode, that sounds like a horrible design! Has anyone had any joy correcting this with a suitable protection diode? Was hoping to get a little bit of a lesson learned from you guys that have played, before I jump into this thing and snoop around. I'll look into the rechargeable thing with eneloops I guess. Although I may just build myself a VDI cable for the road... with a 1/4 inch backup. does anyone have the spec/ pinouts for what VDI requires? Which pairs of the 8 are used?
  7. oh and can you retrofit a current battery pack to this device without damaging the supply? That would be way better than becoming a AA distributor.
  8. Hi, i may be a little late to the Variax party but I was finally convinced by the tuning capabilities to dive in and pick up a well looked after Accoustic 700. I know these are obsolete products now and i've had a bit of a blow off from Line 6 saying that I can send it across the country to be looked at and maybe it could be fixed... Anywho, My acoustic did not work straight out of the packaging and I thought I'd been dudded by the seller. I checked it out through the 1/4 inch battery powered option and I got nada... no LEDs and no sound. I then checked it via the RJ45 port through my xt live... surprise surprise it came to life. i gave it a good work out and it didn't miss a beat. Went back to the battery and nothing... I measured the voltage to the board, changed batteries and thought that that power cct must be knackered... Left for a business trip and returned a week later, thought I'd give it one more crack and it has now come to life! except that it sounds like a dying battery, all crackly on strong plucking. This isn't there through the VDI. I don't run two supplies concurrently after reading about it on here. What I am looking for is any service tips, schematics on this instrument in order to make sure i get a decent life out of this unit. i stumbled on a few threads from the archives which relates to power but hte links are all broken and hard to search. Is there anyone here that still dabbles with my model instrument? I'm capable with schematics and with an iron if necessary.
  9. Hey cruisinon, There are two sections to the box, one vented area on the back where the fan resides with the power supply and the back on the amp and mixer interface. The other section is the sealed resonant chamber where the driver lives. Take the driver out by removing the screen first and have a look at the cladding and the top hat wiring. You'll see how close that wire is to the driver as it moves back and forth. On mine it was close enough to warrant taping to the back of the top hat stand recess. Once I did this and put the thing back together, no more buzz. Whether the vibration was here or elsewhere I am not 100% but I I can repeat the process so I'm happy with the fix. You might be able to get to it from the blank cover on the side two but it is too tight for my hands
  10. Yeah tudscamp is dead on with the above, you can't just use any old fan in these things, they are micro controller speed operated. I saw the units that came out of my L2 pair and I was equally surprised as the tech that they failed the way some of us experienced. The replacement is certainly not superior in specs... except to say that it doesn't sound like a circular saw reenacting a scene from Aliens. If you attempt to replace with a cpu fan or the like, you will probably be disappointed with the vibration sound from it. Worth more hassle trying to find a compatible fan when the techs at Line 6 already did the QA on this one. Just for another result - my L2ts returned with a vibration sound imediately after having the fan swap out performed. I was ready to lose my cool pretty hard and realised it was a slightly different sound than the first. Had me and my friendly tech stumped for a while until he opened the unit another way and noticed the little cable that attaches to the stand switch seems to be exactly routed to just brush the cone of the speaker. after removing a litle of the cladding it was plain to see that there was too much slack on this cable. I taped the cable back to the stand top hat and haven't heard the sound since. Just another weird rattling sound removed from these speakers. They sound so much better without that buzz :)
  11. Yeah sorry, I thought it would get a little more commercial than required. Basis of the idea is that there are so many hard luck stories about why you miss out on the gig and why you miss an opportunity that someone else grabs in this industry that it would be nice to be part of a story where the opposite happens. Where everything that could go wrong does and then you have invested in a product backed by a company who is there with you to deal with the issue however you need it and get you to the show without unecessary stress. I'm not looking for a big break, quite the opposite, but somebody here might need it. Nevertheless, my down time is limited and precious to me which means that I have an expectation that if I look after the gear I bought, then the gear (and the OEM) will look after me with the support I require, (at a cost if need be). If my brother's wedding is a week away and my M20d starts doing what yours did, I'd want to be able to look at the options above in order to achieve the return on investment when it counts, not when it is convenient for the OEM (especially during warranty period). It might be old fashioned but that sort of service builds brand loyalty and that spreads like wildfire nowadays through social media.
  12. Apologies for the delay in getting back Arne, Im out of town. I'll give it another soak test when I'm back home. The SD card is not a slow card, I purchased it specifically for the purpose (not to say that it can't be faulty). Is there a posibility that the SD card could cause this sort of problem? I would have thought that th SD would only interact with the system when armed to record, I was only routing my stereo input through to the L3ms, no recording. I have been using the gear to de stress when I get back from a work roster away, the last thing I'm looking forward to is fault finding the thing that is supposed to put me in a good mood :)
  13. In response to reman parts exchange I say yep. When your livelihood is on the line you need confidence in your manufacturer to keep you working after committing to their product. In my business the process works where secondhand remanufactured (to a known quality) is available when repair turnarounds are excessive. The units have a known value and you purchase them at that known price. Once you provide your faulty unit, the transaction will be credited the exchange value straight up. Initial credit is ~ full price of unit, credit is difference to bring a shell to agreed working condition. Another option is to provide hotswap stock. A working unit is exchanged for a faulty unit under warranty claim with an authorisation for an agreed value. Once Root Cause Analysis is performed, credit is applied to the value warrantable. Depending on the terms of Warranty this could be the entire amount or a percentage or an amoutn equal to the warrantable period left. If the fault is not warantable the repair costs to turn around to seed stock is charged to the customer from the credit authorised. Might sound a little complicated but this sort of service wins business hand over foot in time critical industries. Considering how cut throat entertainment industry is, its amazing it is not more widely represented.
  14. Thanks for the reply SiWatts69. I've had a good look at the connections and I'm not sure it's the issue. If there was a physical connection issue then why would it be an issue only after a number of months and not straight away? Also, I would assume that if I have the problem, turn it off an then turn it back on, it should still be there. If it is a contact corrosion thing, same deal (or working the connection should produce crackle and restored sound), definitely not a coordinated block at once? I noticed also that a few channels that I have muted (mics) were showing as muted in the icon but were not muted in perform menu and the screen was unresponsive to unmuting them. When I went to patch the inputs to another channel the system was extremely slow to respond (in the region of 20 sec). This is software glitchy by my reckoning and cycling power for a fourth time appears to have stabilised it for now. I will be monitoring this and am feeling gun shy about using it until I can pin point the problem. I guess the only thing that is relatively recent in this machine is a CF card, Samsung 64GB SDXC type 10 unit. Its high speed and shouldn't be affecting the unit like this even if it is a bad egg. It has been working fine for more than a couple of weeks with this memory card. Any other occurences spring to mind?
×
×
  • Create New...