d93swo
Members-
Posts
13 -
Joined
-
Last visited
Everything posted by d93swo
-
Hi, I bought Native Helix online, and lately I bought a new computer. I would like to use Native both in my laptop and new computer. Hoe could I do it? After I install it in my new one, and my protools always show inactive plug-in(show as attached photo). I installed Native 1.10. Hope someone can help me fix it. Best, Kay
-
Thank you for your answer. I have read this in POD HD 500 advanced guide. My question is I cannot find "CC#0" in pro tools midi control. CC#32 in pro tools midi control refers to "program change". However I need to know how to change "setlist".
-
I'd like to use pro tools control pod hd500x. I use a midi channel to do this. But I cannot find "bank change( CC#00 ) in pro tools. I can change presets in the same setlist. I use pro tools 10.3.9.. How could I change pod hd500x setlists by midi signal in pro tools?
-
About antennas, they were not inside the rack. And when I hear dropouts, the RF LED still show green. But not 5 green LEDs, it showed from 2 to 5 green LEDs. And it changed very soon. Red one didn't come on then.
-
Antenna jack assignments were both locked. Yes, transmitter was mounted on my guitar strap.
-
I use the G90 original antennas. And the IEM antennas was at least 10 meters away from G90. I scanned before the show. It's most clear channel. I used channel 3 on RF1.
-
Or is it possible my G90 a defect?
-
Hi, I have G90 for a month. And I encounter a serious problem tonight. It was a 3000 people arena. I used RF1 because there were more dropout on RF2 when sound check. When the show started, I saw the RF led was sparkling and the sounds was not continuous. I didn't leave my site. It's less than 2 meters between the receiver and TBP12. Still dropouts often. The worst situation was when the vocal come to me with his IEM and wireless microphone. I really like sound of G90. It's perfect to be with POD 500x. However the dropout problem is too big. Could you help me to solve this? I really wish I could use G90 in the future tour and concert. Best regards, Kay Liu
-
The show is fine and G90 works well yesterday. Thank you. According to your answer, I wonder why Line6 publish RF2? What situation makes dysfunction of RF1?
-
I use it yesterday in a small arena can contain .about 5k people. It's rehearsal yesterday. When I use RF2, it dropout several times( very short and discontinuous). When I change it to RF1, It's fine. Even when I walk to the PA, it works well. But there's no audience yesterday. I will know if cellphone or wifi hotpot does interfere or not tonight.
-
I've tried the RF2 and RF1. It works when the receiver and transmitter are in the same room. But it doesn't work when go to the next room.
-
Hi, I've use G90 in my place. But it doesn't work well. The signal dropouts even in the next room( less than 5ft, and door is open), How could I solve this? And I worry when I use G90 in the stage or in a big arena. Please help me, thank you.
-
Hi, I have 2 questions here. 1. I have one G90 system bought from Hong Kong, but I live in Taiwan. I'd like to buy one more TBP12 transmitter. How could I do? 2. If I want to improve the signal range of G90( more than 300 feet), what can I do? Such as change antenna or something else?