Search the Community
Showing results for tags 'exp 2'.
Found 3 results
-
I wonder if this is a bug: Prerequisites / basic settings: Wah block assigned to EXP 1 (toe switch, inactive) Volume block assigned to EXP2 (toe switch, active!) Preset was saved with the focus on the Output block (could be any other block, though), i.e. Output block is shown in the bottom part of the display when the preset is loaded --------------------------------------- now I press the toe switch to activate the Wah block (EXP 1) -> the red LED lights up -> Wah block becomes active, Volume block inactive but the lower part of the display now shows the name and parameters of the Volume block and the Volume block in the signal flow window got the focus (light gray frame) I observed this behaviour before and even after the recent update to firmware 3.71.0 I've tried other presets and other settings, e.g. engaging the Wah depending on the Expression pedals position, but the error persists. Each actuation of the toe switch brings the Volume block up on the display, regardless of whether EXP 1 or EXP 2 has been activated Can anyone comfirm or deny this behaviour? Is it of any use or is it just an error?
-
Hello all, Wanted to see if you all could help me with this...so I typically use my stomp with just one expression pedal with a TRS Cable, and all works great. I attempted today to use a second EXP in conjunction with the first one, using a Y-split cable (tip & sleeve into one exp pedal, and ring & sleeve into the other). To my surprise, this didn't work the way I expected. Using either exp pedal going one full sweep starting from heel to then toe position, the stomp reads 0% to 100% only halfway through the sweep, then goes back down to 0%...at the toe position..?! So for one motion of my foot from heel to toe, the stomp goes 0% to 100% to 0%. I am baffled to say the least and I have tried changing every settings for EXP in the Global Settings but he has yet worked. If you guys have had experience with this issue, please let me know. Thanks
-
So I use for Helix for more them half a year I think so I know how to use it and I know that to change between those two you need to step hard enough on the pedal, and it worked good till this monday. Now it does not change as good as it did. I have to push a lot harder and even when I do it doesn't switch in most of the times. And when it does there is also a problem that I see that it changes for a moment and then goes back like I pushed it twice(which, of course, didn't). Couldn't find anything on this topic by myself, so hope someone can help me with this.
