Search the Community
Showing results for tags 'exp1'.
Found 4 results
I've looked around for an answer but have yet to find one, so here goes... I've supplemented my HX Stomp with a Mission SP1-L6H, but I also have a single external switch; I'd like to use them so the HX Stomp's 3 switches can access Snapshots, the EXP1 can be set to the SP1-L6H and the small switch can be set as Tuner/Tap Tempo. So far, everything works with one exception: The expression pedal's toggle switch doesn't work. So when I want to use the Wah, for example, I need to stomp a switch to engage a snapshot where the Way block is "on" and THEN start rocking the expression pedal. My question is this: Is it not possible to have the expression pedal toggle the wah (or whammy, etc.) with its switch like a regular wah pedal? If it is, how do I set this up? Thanks! Chris
Hi again guys, I have a question: Got my ‘baby’ board set up for vocal and guitar with the Stomp at its heart for the guitar FX (photo). As mentioned in a previous topic, I have FS4 & 5 acting as Page < and Page > (the two-button switcher under the Stomp). Everything is working fine. I have a dedicated Wah effect working separately from the Stomp. Question is about whether there’s a way to utilise FS4/5 when needed AND Exp1 (to access wahs, whammys, etc). Previously, Phil_M helpfully suggested a DMC MIDI pedal through which Exp1 could be accessed. I could go down that route if necessary. My question is - could a simple, bespoke, single button A/B switcher with TRS output allow switching between the stereo signal from FS4/5 and a mono (tip) signal from an expression pedal for Exp1 function? Cheers, Andy
I just got the helix a few days ago and i love it but a few things is bothering me. If EXP1 is the expression on the board why doesn't it work? it only work as EXP1 when something is plunged in the second EXP. ill assign a Wah to EXP1 for the position movement and nothing will happen, so ill assign to EXP2 then i will get movement. when a cable is plugged in EXP2 the board expression pedal will work as EXP1. i hope I'm making sense cause I'm getting annoyed with the thing.
I just bought a Helix, and have been playing with presets and even created my first custom preset. For the life of me, I can't figure out how to switch the expression pedal between EXP1 and EXP2, which are set up for volume and wah respectively on some presets. All I can get from it is volume control, but can't switch to wash mode. I have seen mention in the manual of a hidden toe switch, but I can't figure out how that works. Hints? Clues? 6stringnazi