Search the Community
Showing results for tags 'guitar rig'.
Found 3 results
-
I'm trying to find a way to extend my practice time by connecting my JTV ( or strat ) to a laptop and leaving the HD500x for final pre-gig setup and practice. Although I upgraded to a much better VDI cable I suppose I could use the original one to get a JTV - USB - laptop connection, but not sure how that would work with software like Guitar Rig. Or I could get something like the guitar link. Ideally I'd have something better than a bare guitar signal ( a few effects ) which could mix with a slowed down mp3 or youtube video for practice out through headphones. Behringer Guitar Link https://www.native-instruments.com/en/products/komplete/guitar/guitar-rig-5-player/ -
I apologize if this was asked previously elsewhere. I tried perusing the manuals and searching the forums... For the last 4 years, I have been using Guitar Rig with Rig Kontrol live. Honestly, I might still be a happy user if NI would keep their products up-to-date and not discontinue their hardware. :angry: I can't do a live show anymore without experiencing bad audio drop-outs and worse. Time to ditch and look elsewhere... One of the cool things I was able to do with GR, however, was route speaker simulation (cab sim, etc.) to ONLY one side of the outputs. My common setup was to run the output with NO cab sim to my on-stage amp, and the output with the cab sim ON to the DI/PA system. The tones were just a little off from each other, but my stage amp has V30's, and so I'd run the V30 cab sim for the house line, and with a little EQ, I was a pretty happy camper. This became the better option, rather than A) Mic'ing the stage cab for the house feed (not a fan), and B] Running the cab sim ON to my amp signal (Redundant yuck.), or C) Using NO cab sim (horrible shrill line out). So obviously, that's my question. Can you, somehow, route the outputs on the HD500X in such a way where the speaker simulation is running to, say, the Balanced XLR output(s) - meanwhile the 1/4" amp outputs disengage any cab sim? Or...is there another option/configuration I'm not aware of that addresses this issue? Thanks for the help!
-
Hi, Could someone please help with the following: 1. is it possible to have a sound from Pod Farm VST in Reaper in computer speakers? Right now I have a clean guitar signal from speakers, to be able to hear actual tone I have to use headphones. 2. How to configure Guitar Rig and Amplitube to work with UX2 (playing through computer speakers)? Tried many different settings and everything I got is signal coming to application (peak indicators are live as I hit the strings), but no sound from speakers. Many thanks for any help :-)
