Search the Community
Showing results for tags 'loops'.
Found 4 results
-
Hi gents! I just finished wiring up my pedalboard and I can't solve this issue. My signal path goes like this I go with a 4 cable method: Guitar -> Hx Stomp Input -> Splitter cable -> [R side goes to AMP From AMP SEND -> Return R] [L side goes to switcher -> Return L] -> from HX OUTPUT -> Return AMP. Now my problem is when both loops are engaged and some outboard pedals are on I get a high pitch noise like a feedback. I cannot get where is the problem. Can you help me? -
Although i am happy with the on-board tuner, there are lots of times I would like to be able to look down while holding a single note to check tuning during a song. As I play mostly in trio format, there is often no time to tune between songs. Would i just set up a send loop without a return? Does Helix need to see a return signal? Is using the headphone out jack the way to go? Thx in advance.
-
Hey all, Is there any way to set up the HD500x to have 2 effects loops? For example, could I use the Headphone out and aux input as a send and return for another effects loop? I think that the way that this would probably work practically is to have one "signal path" which goes guitar input -> internal stuff -> Headphone out. Then have a second signal path which goes "aux input -> stuff -> live outs?" I have a good bit of outboard gear that I currently use with an older POD, and really need to be able to put them in 2 separate loops (one for preamps and gain stages, one for post-amp time based stuff) which I currently can't do. Is it doable with the HD500x? or do I need to go to Helix for that?
-
Creating Quick Loops w/ POD X3 Live - Line 6 Tips & Tricks, Ep. 9
Line6Tony posted a article in POD X3 Family
