Search the Community
Showing results for tags 'relay g75'.
Found 5 results
-
Hi all, I'm new to this and today; purchased a G75 for use with my bass guitar. Having opened it from the packaging brand new, the receiver doesn't seem to connect or find my TB516 G transmitter. Whenever I try to set it up as it states by creating a new scene, turning the transmitter off and turning it to channel 1 or 2 when prompted, it says 'No TX found' and then goes back to saying NO TX in the bottom right corner. Any suggestions, or am I being stupid? Kind regards, Dan
-
The instructions for channel scanning is incomplete in the Relay G70 & G75 Advanced Guide and in the Relay G70 & G75 User Manual There is no mention of the channel scanning process and how to use properly. I searched through other digital wireless manuals and in the XD-V75 User Manual, on page 14 I found instructions for a similar process. I assume it works the same way. This should be updated in the G75 user manuals to correctly provide instructions, as you know this really critical to an error free experience of using digital wireless systems. Also, the steps to get to the Channel Scan on the G75 are more complicated than they should be. The channel scanning procedure is something that should be done at every venue, with more than one TB516G this is an onerous process. Especially since unlike the G55, there is no indicator of wireless interference on the receiver display unless you do a channel scan. I would like this improved on the menus on the next firmware update to make this task easier to go through. -
Got this from GC: Line 6 Relay G75 Now: $299.99 Regular Price: $499.99 Save: $200.00
-
Relay G75 Scanning needs interface improvements!!!!
djangob posted a topic in Relay Digital Wireless
The steps to complete a Channel Scan on the Relay G75 receiver are more complicated than they should be. In order to not have dropouts in a live show, the channel scanning procedure is something that HAS TO BE DONE at EVERY venue/gig, with more than one TB516G transmitter this is an onerous process. At 50+ shows a year, this is 50+ times to have to quickly do and configure. Especially since unlike the G55, there is no indicator of wireless interference on the receiver display unless you do a channel scan. This is a professional digital wireless system, it should be setup to work that way. Please correct and improve the menus on the next firmware update to make this task logical and easier to complete. The Scan menu selection should be it’s own menu item, not buried and near the top of the list. -
I replaced my Relay G55 with a Relay G75. The G55 was in a 1/2 rack soft case which worked great. The G75 is an odd sized amp-top design, not sure why it wasn’t also designed as a 1/2 rack, but any protection case ideas? Is Line6 planning on releasing a case for the G75
