kaioslash Posted November 2, 2015 Share Posted November 2, 2015 Personally, I have a Variax 59 JT , and when plugged it in HD500 by RJ45 cable could use it without the drums and playing normal, now of nothing if euconectar it only by cable RJ45 , she just connects Variax more no sound no to work must connect another cable p10 to output the sound , and yet she is having a hiss , something that previously had not when he called simulations , someone knows what might have happened? thank you Quote Link to comment Share on other sites More sharing options...
kaioslash Posted December 10, 2015 Author Share Posted December 10, 2015 Someone ? Quote Link to comment Share on other sites More sharing options...
cruisinon2 Posted December 10, 2015 Share Posted December 10, 2015 Personally, I have a Variax 59 JT , and when plugged it in HD500 by RJ45 cable could use it without the drums and playing normal, now of nothing if euconectar it only by cable RJ45 , she just connects Variax more no sound no to work must connect another cable p10 to output the sound , and yet she is having a hiss , something that previously had not when he called simulations , someone knows what might have happened? thank you I'd be lying if I said that I understood most of that...but near as I can tell, you've got no sound connecting with the VDI cable. If that's what's happening, try another cable...if it persists, then it's either the guitar, or maybe the input settings on the POD. Quote Link to comment Share on other sites More sharing options...
kaioslash Posted December 10, 2015 Author Share Posted December 10, 2015 quando apenas ligar o cabo DVI, ele se conecta, mas o som não vem, eu vou chamá-la em HD500 via cabo VDI e ligar o sintonizador, não deixa notas sem tocá-lo e mantém a mesma nota no sintonizador, lá quando eu ligar cabo de 1/4 ela começa a funcionamento normal, ao testar outro cabo de rede comum, meu HD500 desligou quando conectado Quote Link to comment Share on other sites More sharing options...
diggerbarnz Posted December 11, 2015 Share Posted December 11, 2015 fazer o que Cruisinon disse - tente um cabo RJ45 diferente Quote Link to comment Share on other sites More sharing options...
davidb7170 Posted December 11, 2015 Share Posted December 11, 2015 I didn't have time to translate the last couple of posts, but agree with cruisinon2 try a different RJ45. One thing that would really not work would be a "cross-over" RJ45 -- don't know if those are still out there, but used to use them for hooking 2 pc's directly together with Ethernet. They have the send and receive wires flipped from end to end, so that would mess up your signal & power paths when used with a variax, which is not Ethernet, just uses the same cable configuration... Dave Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.