wayneblue Posted March 10, 2016 Share Posted March 10, 2016 There are several presets that i would love to use.But, it seems that you can not control the volume, by the foot pedal..And when i add the volume pedal (FX block), i still can not control the volume, by the foot pedal..Any ideals on how to do this?? Quote Link to comment Share on other sites More sharing options...
BBD_123 Posted March 10, 2016 Share Posted March 10, 2016 Have you set up the Vol pedal correctly? Click the pedal toe switch to select Vol (Green LED) Pick the Volume Pedal effect and move it to the front of the effect chain Save selected Now go to Mixer and select Volume Pedal in Model and EXP TOE SWITCH in FS Assign. Parameter should be set to VOLUME Make sure that Minimum = 0% and Maximum = 100% Check that Green LED is on and EXP-2 is the selected Controller. Save Hopefully, that should sort it out. Quote Link to comment Share on other sites More sharing options...
cruisinon2 Posted March 10, 2016 Share Posted March 10, 2016 Many of the difficulties you've been posting about are basic functionality topics that are all covered in the manual. I know the POD isn't the most intuitive device in the world, and manuals are not exactly a "fun read", but you'll save yourself a lot of time by going through it, rather than waiting around for someone to answer you every time you get stumped. 1 Quote Link to comment Share on other sites More sharing options...
BillBee Posted March 10, 2016 Share Posted March 10, 2016 One thing that helped me was to load a patch that works and see how it was set up. Vol pedal and switch assignment. Quote Link to comment Share on other sites More sharing options...
Smashcraaft Posted March 10, 2016 Share Posted March 10, 2016 Load good sounding patches from CustomTones, watch Tutorial-Videos to the POD, read the MeAmBobbo Guide, use the search-function here in the community. Quote Link to comment Share on other sites More sharing options...
cruisinon2 Posted March 10, 2016 Share Posted March 10, 2016 Load good sounding patches from CustomTones, watch Tutorial-Videos to the POD, read the MeAmBobbo Guide, use the search-function here in the community. +1 for MeAmBobbo, it's a great resource. Customtone, imho is a dead end, but as always ymmv. Quote Link to comment Share on other sites More sharing options...
wayneblue Posted March 10, 2016 Author Share Posted March 10, 2016 I figured it out.It was the Controller Assign issue..Got it..Thank you all so much.. I'm gonna play around with some more. Quote Link to comment Share on other sites More sharing options...
wayneblue Posted March 12, 2016 Author Share Posted March 12, 2016 Have you set up the Vol pedal correctly? Click the pedal toe switch to select Vol (Green LED) Pick the Volume Pedal effect and move it to the front of the effect chain Save selected Now go to Mixer and select Volume Pedal in Model and EXP TOE SWITCH in FS Assign. Parameter should be set to VOLUME Make sure that Minimum = 0% and Maximum = 100% Check that Green LED is on and EXP-2 is the selected Controller. Save Hopefully, that should sort it out. Thank you so much.I figured it out.. Quote Link to comment Share on other sites More sharing options...
BBD_123 Posted March 12, 2016 Share Posted March 12, 2016 Always nice when it works :) Have fun. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.