spideychick Posted August 9, 2014 Share Posted August 9, 2014 I purchased UX1 yesterday and I've been trying to get sound, but there's nothing coming. I bought UX1 to get better quality for my streams that I will start on Twitch. I've checked for other solutions on the internet, (including old posts from this forum) but nothing seem to work. I've made sure that my settings are correct in the sound/audio settings in the control panel. I've tested the audio in Audacity and OBS, but no sound. I've downloaded and installed the recent drivers (from 2011 right?) but nothing. Is there more programs or something else I need for it to work? I got Windows 7 and my mic is Shure SM57. It would mean a lot if any of you could help, thank you :) Quote Link to comment Share on other sites More sharing options...
BigChas52 Posted August 9, 2014 Share Posted August 9, 2014 Go into POD Farm and make sure that the input is set to MIC 2 Quote Link to comment Share on other sites More sharing options...
spideychick Posted August 9, 2014 Author Share Posted August 9, 2014 How do I do so? :) Quote Link to comment Share on other sites More sharing options...
spideychick Posted August 9, 2014 Author Share Posted August 9, 2014 Oh never mind, I got it! Thank you so much ^-^ Quote Link to comment Share on other sites More sharing options...
PoldoLeo Posted September 16, 2015 Share Posted September 16, 2015 Hello! Just reviving this post so as not to create a new one, because I think I have a similar problem. Using my UX1 and Logic Pro 9, I have no problem recording Guitars, everything works fine. But I can't get anything out of my Mic input. I plugged in a brand new SM58 mic, with a brand new xlr cable, but I hear nothing. Is there anything I forgot to do, or is my Mic input probably broken? Thanks a lot in advance, this is driving me crazy! Quote Link to comment Share on other sites More sharing options...
Triryche Posted September 16, 2015 Share Posted September 16, 2015 Are you selecting Mic as your inout in either the Line6 Audio-MIDI control panel or POD Farm? Quote Link to comment Share on other sites More sharing options...
PoldoLeo Posted September 16, 2015 Share Posted September 16, 2015 I saw that that advice was given to spideychick, so I looked for that, but I can't seem to find where I would check that. Must be right in front of my eyes, but I don't see it. I checked the Preferences, no such option, and I clicked pretty much everywhere on the PodFarm, but I didn't find it. So, no I don't think the input selected is Mic.. :) Quote Link to comment Share on other sites More sharing options...
BigChas52 Posted September 16, 2015 Share Posted September 16, 2015 In POD Farm, it's half way down, on the left, next to the MUTE button. In POD Farm 2, it's on the Mixer tab, and says "INPUT" 1 1 Quote Link to comment Share on other sites More sharing options...
PoldoLeo Posted September 17, 2015 Share Posted September 17, 2015 Ok, looked some more, and I found it :) :) For further lost people, it's in the Mixer view! Thanks! Quote Link to comment Share on other sites More sharing options...
bleckmansoul Posted October 20, 2016 Share Posted October 20, 2016 thanks from bleckmansoul berlin Quote Link to comment Share on other sites More sharing options...
Milesrock Posted January 27, 2019 Share Posted January 27, 2019 Where is the POD Farm displayed in garage band that gives me the option to select Mic ? I'm using Sm58 Mic into UX1 Mic port with garage band and cannot get the F'n Mic to work Very aggravated! Am I missing a piece of the UX1 software ? Quote Link to comment Share on other sites More sharing options...
Gaz_Ham Posted January 28, 2019 Share Posted January 28, 2019 11 hours ago, Milesrock said: Where is the POD Farm displayed in garage band that gives me the option to select Mic ? I'm using Sm58 Mic into UX1 Mic port with garage band and cannot get the F'n Mic to work Very aggravated! Am I missing a piece of the UX1 software ? Go to https://uk.line6.com/support/manuals/podfarm/ And download the Podfarm 2 Advanced User Guide. Then scroll to chapter 3•2 and read onwards. If you are using Podfarm as a plug-in, as it sounds that you are you, need to open the Line6 AudioMidi Device and select what input you want. Set a copy of it to your desktop for easy access. If you are using Podfarm stand-alone, the option to select input is in the mixer view. Failing that, you need to read up on how to select input in garageband. Quote Link to comment Share on other sites More sharing options...
ejcvl Posted January 9, 2020 Share Posted January 9, 2020 Hi Guys, Thanks to this article i found the input source. However I bought the UX1 to be able to record simultaneously voice and guitar. Is that possible (I am using Garageband). Quote Link to comment Share on other sites More sharing options...
ejcvl Posted January 10, 2020 Share Posted January 10, 2020 Never mind found this article. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.