These forums are read only, please use our new forums here.

Main :: JM4 Looper



Problem with JM4 looper and volume level
by tphilarkin on 2012-08-05 07:01:15

Hi,

I seem to have an issue with my looper when all the effects are bypassed. Basically when the pedal is first turned on, the guitar volume is really low, but if i use the tuner and then go back to guitar, the volume is much louder and clearer.

*What I have tried so far

1. Factory Reset

2. Updating Firmware / Reinstalling

Aside from those I've tried messing with the pedals settings but no luck. Just to make it clear, the problem/workaround I've found is this:

*Step by step

1. Turn on pedal

2. Bypass effects

(At this point volume is very quiet)

4. Turn on tuner

5. Turn off tuner

(Volume is clear and loud)

I'd really appreciate any help on the problem and thanks in advance

-tphilarkin



Re: Problem with JM4 looper and volume level
by tphilarkin on 2012-08-14 07:42:18

bump



Re: Problem with JM4 looper and volume level
by tejasbullet on 2012-10-06 18:31:37

As a matter of curiousity, how do you go about "Turning on" your pedal?




The information above may not be current, and you should direct questions to the current forum or review the manual.