jimbojamz

Thank ye!

I see there are 3 downloads that all say 2.6 - they are different sizes too. Why? TIA

Doubt it. just 'sayin.

I need to try the LS. I've been geeking on the placater all weekend!

I bought my Helix in part bc of the promised updates and consider it part of the deal. If they stopped the updates I wouldn't get rid of it (at 2.5 - at 1.0 i would have in a heartbeat) , however I would feel I had been misled. I realize they wont update it forever, but if they had never updated it from v1.0 I wonder how many would have bought it? I sure wouldn't have. Just my .02 worth. It's good you appreciate the updates, And do too, but I stand by "it's built in to the price" how else do they pay their people for the "free" upgrades?

Nothing in life is "free" you paid for that update when you paid for the Helix. imo

apparently I have 2 accounts... made one back in 08' made another when I bought my Helix I guess. solved

Is there a way to change to a different snapshot while in Native? Even manually would be fine. tia

I use the Ernie ball vpjr vol pedal. no mod necessary, just make sure you plug it into the pedal out jack using only a ts cable.

both. EV FRFR monitor FX return of Carvin V3 into open back v30's (two of them)

Is there a way in the editor to put the parameters of what ever fx I'm working on into snapshot mode? (Like when you push and turn one of the knobs under the screen and get the brackets [6.2] ?) tia

I have a patch that splits off after the pre-amp and before the IR to send output (w/o IR) to one and two. it then goes to my tube amp fx return. The other path continues into the IR and on out to the Helix main outs. can i put a vol pedal on both outputs and use the built in pedal to control them both in sync? https://photos.google.com/share/AF1QipNCBMj-j412MNVn08y0Vp6AdumIVA7Q7wwi_c4GixUd5LavcTw5wrr-3hv6GCGR0Q?key=LWZWTElCdzdUanVPOVQ4V3JnSGY2VkJ1MUpuSlF3

Told me to wait 55 seconds after I hit submit on a topic. Fine, went back to my post all the text in the body gone.... re-did it, and now there are 2 of the f****** same post. I'd sure like to delete one of them, but don't see where that can be done. Bad design imo

I cant find where to assign the toe switch to the wah. Any help is appreciated.

Building a patch with a wah. Easy enough to assign it to one of the 10 switches, but how do I assign the toe switch to it for on/off? TIA