Jump to content


  • Posts

  • Joined

  • Last visited

  • Days Won


Everything posted by cristt

  1. if you want to feed your Focusrite with the full pod go preset (with amps, cabs and so on) you can just use the main out. Then set properly your input levels on the Focusrite software (if it's got a line/guitar switch, set it to line).
  2. there's an identical issue on another post just down the thread list.
  3. difficile da dire, hai messo il numero di serie correttamente? metti uno screenshot dell'errore.
  4. if you use the amp out jack and set in the global options not to use the cabs, you won't get the cab sims even if they are active on the preset. otherwise if you use the main out you have to turn it off manually, for each preset.
  5. if you are using amp out the pod go volume knob won't work. use the main out (mono).
  6. Hi! I was wondering how the amp out is meant to work when set to pre-cab/IR. I understand that this way I still get the amp modelling, but if I go straight into my guitar amp front panel, I would basically get a (virtual) amp into a real amp, which is usually not good. So usually we should plug into the fx-return of the real amp (if available). But, the manual states that amp out "is meant to send directly to the front of your guitar amp"... Which is kind of misleading...so what's the deal here?
  7. you'are facing audio latency. it is common and you have to deal with it, you can't completely get rid of it, but you can minimize it. the DAW has very little to do with the equation. it depends on your overal system, the pc/mac you are using (cpu power, ram, disk, etc...) and the audio device you are connecting. first you need to install the infamous ASIO drivers that come with your audio interface (the pod go), and use it as your audio driver inside your DAW (go into audio/preferences/drivers menu of your DAW). then you have to tweak the ASIO parameters like this: to reduce latency you need to reduce the buffer size, but if you reduce the buffer you may step into audio glitches like pops and noise that are the signal that your system can't cope with the low buffer size you have set. so you need to raise the buffer, until the audio is good. if still you get very bad latency your system maybe is not powerful enough. a good latency value for getting close to real-time audio is something less than 10 milliseconds. so the 0.2 seconds you're getting is indeed really bad.
  8. cristt

    Swap snapshots?

    nope that doesn't solve my answser. However now I know from other sources that you can't swap snapshots (I mean, in a preset, put the 1st snapshot as 4th and vice-versa, for example).
  9. that's a good point.
  10. +1 renaming shapshots and labels would be awesome.
  11. Snapshots do have auto-save feature if you enable it (see global settings).
  12. cristt

    Swap snapshots?

    I don't have the pod go yet, but I was wondering if you can swap snapshots, from the machine (I heard that probably it's possible from the edit software). It would be awesome, like keeping pressed the two switches together just as you do it with the single blocks in stomp mode. From the manual I read that the active snapshot, when you save its preset, is recalled when you activate that preset, and it's all good, but a nice update would be swapping snapshots. Thanks!
  13. I would agree with you, but looks like, at least at the moment, amp out brings your amp sim out. But if you intend to go only to your amp (no main outs) just switch off your amp from the patch! Or, maybe better, plug your amp out into the FX return of your amp.
  14. Given that you have a compatible system for pod go edit, if you search YT there are a number of videos on how to solve missing MSVR100.dll file.
  15. I agree. But bare in mind that amp out bypasses ONLY cab, so you still get the amp modelling to get your clean/distortion settings out of the simulated amp (and should work well even if you go to your regular amp input).
  16. I don't know if it was on another topic but a possible solution might be using a stereo (balanced-TRS) jack cable from the pod go to the speaker, instead of a normal instrument (mono) jack cable.
  17. Kind of strange. Of course you need to connect your FRFR via the main out, not the amp out. And did you try to connect headphones? Does that sound better?
  • Create New...